Waterproof Test IEC/EN60529 For Electrical And Electronic Products

The waterproof test is applicable to electrical and electronic products that may be exposed to water during transportation, storage or use. This water comes from heavy rainstorms, wind-driven rain, sprinkler systems, wheel splash, washouts or strong ocean waves. The relevant specifications should specify whether electrical and electronic products must function normally during the test or whether they must withstand flushing conditions and remain intact.

There are waterproof testing requirements for portable, outdoor and automotive electronics. Internationally, IEC, MIL, ETSI and SAE have formulated corresponding testing requirements.

waterproof level
IEC/EN60529 waterproofing is divided into 9 levels (level 0 ~ level 8), waterproof level (e.g. IPX4-waterproof level 4):
Level 0: Completely waterproof and unprotected
Level 1: Water dripping from vertical directions should have no harmful effects
Level 2: When each vertical surface of the enclosure is tilted within 15°, vertical dripping water should have no harmful effects
Level 3: Water spraying within 60° of each vertical surface has no harmful effects
Level 4: Splashing water from all directions on the enclosure has no harmful effects
Level 5: Spraying water from all directions on the enclosure has no harmful effects
Level 6: Strong spraying of water from all directions on the enclosure has no harmful effects
Level 7: After being immersed in water at a specified pressure for a specified period of time, the amount of water entering the housing will not reach a harmful level.
Level 8: According to the conditions agreed between the manufacturer and the user (which should be more stringent than Level 7), the amount of water entering the shell after continuous diving will not reach a harmful level.
Test equipment and instruments

The dust-proof test is used to test the ability of electrical and electronic products, automobile and motorcycle parts, and seals to prevent sand and dust from entering the seals and shells in a sandy and dusty environment. It is also a test method to determine the impact of sand and dust suspended in the air on the product. To test the performance of electronic and electrical products, automobile and motorcycle parts, and seals in use, storage, and transportation in sandy and dusty environments.
Dustproof level
IEC/EN60529 dustproof is divided into 7 levels (level 0 ~ level 6), dustproof level (e.g. IP5X-dustproof level 5)
Level 0: No dust protection at all
Level 1: Can protect against foreign objects with a diameter greater than 50mm falling into the equipment
Level 2: Can protect against foreign objects with a diameter greater than 12.5mm falling into the equipment
Level 3: Can protect against foreign objects with a diameter greater than 2.5mm falling into the equipment
Level 4: Can protect against foreign objects with a diameter greater than 1.00mm falling into the equipment
Level 5: It cannot completely prevent dust from entering, but the amount of dust that enters must not affect the normal operation of the equipment and must not affect safety
Level 6: Completely dustproof

About Us

Shenzhen LCS Compliance Testing Laboratory Ltd., abbr. for LCS, was founded in 2004 in Shenzhen, LCS is now growing into an independent comprehensive third-party institution which focuses on test & certification. Profound technical background and diligent working attitude decided LCS with an outstanding high starting point from the outset，pioneering spirit and consciousness of keeping pace with the times which predestined the thoroughly tempered course of LCS.

Our Labs

LCS Founding Members have engineering background and had gradually built up Safety Lab, EMC Lab, RF Lab, SAR & HAC Lab, Reliability Lab, Lighting Electrical Lab, LED Lighting Performance Lab, Energy Efficiency Lab, Electronic Cigarette Testing Lab, Chemistry Lab, BQTF, Environmental and Occupational Evaluation Lab, Battery Lab, Toy Lab, Textile Lab, Food and Food Grade Material Lab. The establishment of our comprehensive labs ensure our test and certification scope covers almost all fields, such as Reliability and Safety test, EMC test, Chemical Hazardous Substances test, Material Analysis, Food Contact Material test, Bluetooth Test & Certification, Environment and Occupational Health, Performance test of spare parts of Automobile and so on.

Authorization

Moreover, LCS won many authorized qualifications both domestic and overseas. LCS is recognized as IEC/ISO17025 laboratories accepted by CNAS and NVLAP, accredited by CPSC, CMA, accredited for CQC, ISTA, CBTL, SASO, SABS. Meanwhile LCS become laboratory authorized by TUV, BQTF issued by the SIG. LCS had also signed cooperation agreements with FCC, ISED, ETL, CEC, UL, E-Mark, CETECOM, KTC, SAA Approval and many other authoritative institutions, hence we can provide our clients with efficient and professional service for product test and certification.

Experience

Our RF experience ranges from WLAN (802.11b/g/n/a/ac), Wi-Fi 6E, Bluetooth (802.15.1), ZigBee (802.15.4), Z-Wave, UWB (802.15.3), WiMAX (802.16), SRD, DECT, RFID, NFC, GSM, WCDMA (+HSDPA/HSUPA), LTE, 5G (NR/VoNR/eMTC/eMBB/URLLC),UHF/VHF, WHDI, AM, FM, DAB, DVB, GPS, GNSS, COMPASS, GLONASS and more. The products we are mostly working with are basestations, client adapters, laptops, cordless phones, baby monitors, cellulars, radars, sensors, scanners, receivers, immobilizers, remote controls, etc. Modern products incorporate not often one, but a variety of co-existing technologies.

Welcome

LCS is a reliable party. With more than 20 years hands-on experience in the field of Radio, Telecom, EMC and Safety certification, including country approvals worldwide, we will guide you with our knowledge. You are very welcome!

We will be pleased to assist you with your questions or inquiries, please contact us.