The GE Fanuc IC693MDL634 module is an input module with a voltage
rating of 24 Volts DC. It is manufactured as part of the Series
90-30
product line of Programmable Logic Controllers or PLCs manufactured
by the GE Intelligent Platforms/GE Fanuc Company. This module
features one group of 8 input points as well as a single common
power input terminal. The configuration of the GE Fanuc IC693MDL634
module allows for the use of both negative and positive logic
characteristics. Some of these input characteristics are best used
for a variety
of input devices supplied by the users, for instance, pushbuttons
and limit switches. When current goes through the input points, the
input
status table results in a logic level of 1. The power used to run
field devices can be supplied by the operators, but an isolated
output power
of +24 Volts DC can work as a source of power for limited DC
inputs.
The GE Fanuc IC693MDL634 input module comes with an input voltage
range from 0 to 30 Volts DC, and 7 milliamps of average input
current
rating at the rated voltage. This module also features an on-state
voltage range of 11.5 to 30 Volts DC, with a 0 to 5 Volts DC
off-state voltage
range. It comes with an on-state current of 3.2 milliamps at a
minimum and an off-state current of 1.1 milliamps at maximum. The
IC693MDL634 module features LED light indicators that show the "ON"
and "OFF" status for each of the 8 input points. There is an
insert that separates the inside and outside surfaces of the GE
Fanuc IC693MDL634 module’s hinged door and it can be identified by
the blue-colored left edge that signals when the module has low
voltage.
