Baking Varnish Aluminum Access Control Speed Gate Turnstile DC
Servo Motor With 10 Pairs Sensor
Product Introduction
Turnstiles are used at a wide variety of settings, including
stadiums, amusement parks, mass transit stations, office lobbies,
airports, ski resorts,factories, power plants and casinos.
From a business/revenue standpoint, turnstiles give an accurate,
verifiable count of attendance. From a security standpoint, they
lead patrons to enter single-file, so security personnel have a
clear view of each patron. This enables security to efficiently
isolate potential trouble or to confiscate any prohibited
materials. On the other hand, physical barriers become a serious
safety issue when a speedy evacuation is needed, requiring
emergency exits that bypass any turnstiles.
Standard Features&Functions
(1). Operation model: Both directions can be set as controlled mode
or free mode.
(2). NO mode & NC mode can be switched over by users easily &
freely.
(3). Tailgating-detection function.
(4). Intruding-alarm function.
(5). Delayed reset automatically function.
(6). Anti-pinch function: protection against finger entrapment and
personal injury.
(7). Emergency-escape function: the gates will open automatically
by pressing the emergency button which can be remote-controlled
whether the power is on or off.
(8). With interface of relay switch (the dry contact signal or +12V
electrical level signal or DC12V pulse signal of pulse width ≥
100ms, driving current ≥ 10mA), compatible with all kinds of access
controllers.
(9). Equipped with free control software for machine interface &
control command.
Specifications
| Framework | 304# Stainless Steel |
| Swing arm material | Acrylic (optional) |
| The inductive card reader dimension | equipped with the standard mounting brackets or tailor. |
| Machine center | Germany technological motor |
| Power voltage | AC220V±10%, 50Hz±10% |
| Driver motor | Servo motor |
| In-built Infrared | 10 pairs |
| Passing speed in normally open mode | 50 persons/min |
| Passing speed in normally closed mode | 35 persons/min |
| Passage Width | 600mm |
| Swing arm transmission angle | 180° |
| Swinging direction | unidirectional or bi-directional |
| Opening / closing time | 0.1 seconds |
| The time required to running state after power on | 3 seconds |
| Automatic reset time after the failure | 1 seconds |
| Mean time to failure | min. 10 000 000 |
| Operation temperature | -10℃ ~ +70℃ |
| Relative humidity | less than 95% not condensed |
| Working Environment | Indoor/Outdoor (with rain-tent cover) |
| Input port | relay dry contact signal; +12V level signal, pulse width >100ms,
DC12V pulse signal |
| Communications port | RS232/ RS485 electric standard, communications range ≤1200m.
Available to connect with external CAN BUS and Ethernet |
Applications
Government Facilities, Corporate Lobbies, Buildings, Banks, Hotel,
Super market, Park, Building Sites, Museums and Retail outlets etc.
Project Cases
