Battery Tab spot welding machine Semi-automatic DC transistor 5000A
gantry welding
Equipment introduction
● Cheebo lithium battery spot welding machine adopts self-developed
precision welding head, pressure precise adjustment and control.
● CBLQ-5A battery nickel welding machine does not require welding
transformer, small size, light weight and beautiful appearance.
● It can be applied to bump spot welding and needle spot welding.
● 18650 battery spot welding machine has three control modes:
constant current, constant voltage, constant current and constant
voltage combination mode.
● Built-in pre-check function, which can be used to determine
whether the workpiece is energized before welding.
● The welding current of lithium battery spot welding machine can
be switched quickly and efficiently through transistors without
transformer.
● The welding power supply is controlled by switching mode, which
can realize small but efficient welding and high output.
● The power supply welding current rises quickly, and high-quality
welding is realized in a short time.
● The lithium-ion battery pack spot welding machine increases the
connection point function and effectively improves production
efficiency.
● Independent research and development of precision welding head,
precise pressure adjustment control.
● Microcomputer technology control, dynamic real-time monitoring of
welding current, voltage, power and resistance waveforms.
● 5.7 inch high-definition LED display, convenient and intuitive
adjustment of equipment parameters, can store multiple programs in
advance.
● There are three welding methods: constant voltage, constant
current and constant voltage current combination.
Technical specification
| Welding thickness | 0.02-0.5MM | Welding power supply | Transistor |
| Welding mode | Single side double point horizontal welding | Table top and weld head height | 250 (Maximum pitch adjustable) |
| Supply current | 5000A/8000A/10000A | Welding speed | 200P/M |
| Spot welding method | Bump welding/tip welding | Welding pressure | 5KG/F |
| Maximum voltage | 30V(Adjustable by oneself) | Equipment size | 600*900*1300MM |
| Driving mode | Pneumatic | Machine Weight | 60KG |
| Power source specification | Single-phase 220V50/60HZ | Application scenarios | Battery welding |
Welding case
Function Introduction
1. Pneumatic precision welding head
Horizontal welding structure, double linear guide design, left and
right pressure can be adjusted separately. Built-in pressure
sensor, precise control to apply stable pressure.
2. Adjusting mechanism of welding head
The welding head can be adjusted up and down to increase the
distance between the desktop and the welding head. Can weld a
variety of different heights, different types of cells.
3. Thickened tempered glass
High quality explosion-proof glass is used to effectively prevent
the damage caused to the desktop during welding. At the same time,
it can increase the fluency of welding and increase the welding
efficiency.
Equipment workflow
Power on -- check whether the WELED switch is turned on -- place
the product to be welded on the desktop -- Step on the foot pedal
-- push down
the welding head -- spot welding completed -- return the welding
head
FAQ
Q: What's your minimum order quantity?
A: We don't have a minimum order quantity. Whether it is an order
of 1 or 100, we will wholeheartedly support you.
Q: How do I install and run the machine?
A: Our technicians had installed the machine before shipment. For
the installation of some widgets, we will send out detailed
training videos and user manuals randomly. 95% of customers can
teach themselves.
Q: I don't know which one is right for me?
A: Please tell us the following information
1) Battery model and type.
2) Welding material and welding thickness
3) Commercial industry: We have a lot of sales experience and can
provide you with advice.
Q: How does your factory do in terms of quality control?
A: Quality comes first. More than 20 tests will be performed on
each unit. After all the tests are passed, our QC will test the
welding performance.
Q: How can I do if the machine goes wrong?
A: If you encounter such problems, please contact us as soon as
possible. Do not try to repair the machine by yourself or others.
We will respond as soon as possible within 24 hours to solve your
problem.
Service process
Pre-sale:
1. Customers send inquiries and inquiries
2. Recommend products according to customer needs
3. Video communication to confirm final requirements
4. Both parties shall deliver the confirmation of technical
specifications
5. Both parties sign the contract
6. Place orders and arrange production in the workshop
7. Arrange delivery
After sale:
1. Confirm whether customers need on-site service or video
communication guidance for debugging equipment.
2. If there is any problem with the equipment, video communication
will be adopted to solve the problem first. Door-to-door service
can be provided if there is no solution.
Looking forward to your consultation, we will provide you with the
best quality service throughout the process!!!
