Mosi2 Heating Element Mosi2 Electric Heater for Kilns
What is Mosi2 Electric Heater?
1. SUPER 1700, 1800, 1900 MoSi2 electric muffle furnace heater for muffle
furnace are extensively used in the industries of metallurgy,
glass, ceramic refractory,crystal electronic device, industrial
furnace manufacture, etc.. It is an essential ideal element when
the products are sintering in the high temperature.
2. Under the oxidizing atmosphere, the maximum operating
temperature is 1800, the resistance of the heating element of
silicon molybdenum rod increases rapidly with the temperature
increasing, and the resistance value is stable when the temperature
is constant.Under normal conditions, the resistance of elements
does not change with the service time, so the new and old elements
can be mixed.
3. According to the structure, working atmosphere and temperature
of the heating equipment, the correct selection of the surface load
of the heating element is the key to the service life of the
element.
Attention: MoSi2 elements can not be used in 400 to 700 °C for a long time,
otherwise, it will be powered and damaged due to strong oxidizing
action in low temperature.
MoSi2 Electric Heater for furnace:
Molybdenum disilicide(MoSi2) heating elements for element
temperatures up to 1800C(3270F), Our MoSi2 heating elements are
available as straight or bent elements in a wide range of shapes
and sizes, All characterized by long life and consistant
perfomance.
1. Specification:
Grade: 1700/1800
Dia: 3/6, 4/9, 6/12, 9/18, 12/24 etc.
Type: I, U, W, Pole, and U-right angle shapes, etc
And we can produce according to your requests long time use in the temperature range of 400-700°C, otherwise, the
element will be powdering for the strong oxidation under low
temperature.
Application of Mosi2 Electric Heater Heating Element:
| Item | name | distinction criterion | specification | Using range |
| Heating elements | 1700 type | Element operating temperature 1700℃ is acceptable | Le Φ 6-12W type/U type/L type/all kinds of hetero type / stripe shape | high temperature electric resistance furnace |
| 1800 type | Element operating temperature 1800℃ is acceptable |
| 1800J type | Element operating temperature≥1800℃ | Le Φ 3-12W type | Special,high temperature and high-power electric resistance furnace |
| 1800T type | Element operating temperature≤1800℃ | Le Φ 3-12W type U type | Not oxidized special air high temperature electric resistance
furnace |
Physcial property of molybdenum disilicide Mosi2 Electric Heater
Element:
| Density | Bending Strength | Hardness | Apparent Porosity | Water Absorption | Elongation | Fracture Toughness | Compressive Strength |
| 5.8g/cm3 | 350Mpa | 12.0Gpa | ±2% | 0 | 4% | 4.5Mpa.m1/2 | 650Mpa |
Packaging & Shipping
1. From the inside to outer packaging, is foam sponge, carton,
wooden case.
2. Sea or Air transportation, DHL express.
3. Please make sure the 'shipping address' is your confirmed
address.
4. We do check everything in good condition before we ship your
parcel out.
5. We will process your order ASAP after payment is confirmed.
Our Services
1. Timely response,
Timely response to your inquiry, multiple choice recommendations
based on your demand, quickly respond mails and provide solutions.
2. Free sample
Sample and trial order is accepted for the quality evaluation.
3. Strict quality control
Arrange production on time and control quality strictly.
4. Shorter delivery time.
Book the earliest vessel or plane to guarantee the delivery time.
Please tell us the following data of molybdenum disilicide MoSi2
rod heating element when send enquiry to us :
d = the diameter of hot zone ?
c = the diameter of cold zone ?
Le = the length of hot zone ?
Lu = the length of cold zone ?
a=Shank spacing
How many pcs ?
