PINWP-150W Powder-Actuated Plastic-Washered Pin for Insulation
Board
PINWP-150W Powder-Actuated Plastic-Washered Pin Introduction
The PINWP is a powder-actuated washered pin designed to fasten
rigid insulation board to building
structures. The PINWP consists of a 0.300″-headed fastener with a
pre-mounted 1 3/8″ flat plastic
washer. The PINWP is for high-volume applications and is designed
for fastening into concrete and steel.
The heat preservation nail can be widely used in floor heating
industry, power plants, petrochemical
external wall insulation engineering, architectural wall
reinforcement, noise, the construction industry,
dill diameter 8 or 10. Available in different lengths fitting to
the thickness of insulation board. We can
make all kinds plug according to buyers demanding.
| Powder-Actuated Plastic-Washered Pin
35mm soft Washer
drive pin with plastic washer
Good clamping of thin and soft membranes Drainage and waterproofing System Pin lengths available: 30mm, 40mm, 50mm. |
PINWP-150W Powder-Actuated Plastic-Washered Pin Specification
| washer material | PE |
| washer size | 35mm |
| washer height | 15mm |
| tube diameter | 6mm |
| color | grey, white |
| CR9 30P 40P 50P Concrete Drive Pins specification |
| HPD1/4"-25P6 | 25mm/ 1“ |
| HPD1/4"-32P6 | 32mm/ 1-1/4” |
| HPD1/4"-38P6 | 38mm/ 1-1/2“ |
| HPD1/4"-51P6 | 51mm/ 2” |
| HPD1/4"-63P6 | 63mm/ 2-1/2“ |
| HPD1/4"-76P6 | 76mm /3” |
Package of PINWP-150W Powder-Actuated Plastic-Washered Pin
Package of 36mm metal washer :
>> Package
1. 500 pcs per bag, 10 bags per carton. 64 cartons per pallet.
2. to be your requirements.
>>> Delivery
Sample: DHL/EMS/UPS/TNT/EXPRESS
Large Order: we recommend you by SEA ,or by AIR if in an emergency.
HUIHAO company FAQ :
Q1: Are you factory or trader ?
Yes ,we sell what we manufacture
Q2:How long is your delivery time?
Usually the ship time is within 7-15 days
Q3:What is your quote elements?
The size of product, material with surface treatment and the
quantity
Q4:Can you provide samples?is it free or in charge ?
A3: Yes, we can provide sample for we have in stock ,for special
sample you need pay the mold fee ,the
mold fee will return back you after confirm the mass order
Q5: How can you ensure the quality?
1.we can supply CAD drawing pic for you
2.Our company have ISO certificate
3.We have working on this product for twenty years and we have
experience on it ,and we know the point
you focus on
HUIHAO Company introuduce:
HUIHAO company is a insulation fasteners/insulation anchors
manufacturing company,we produce all kinds
of insulation pins and washers.can make mold according your drawing
pic ,Our products is as following :
CD weld pins Lacing Anchors
bimetallic pin Cup head weld pins
Quilting pins perforated base pins
self adhesive pins aluminum solar panel mesh clip
all kinds of self locking washers, Dome caps.
