Description
The AT26DF161A is a serial interface Flash memory device designed
for use in a wide variety of high-volume consumer-based
applications in which program code is shadowed from Flash memory
into embedded or external RAM for execution. The flexible erase
architecture of the AT26DF161A, with its erase granularity as small
as 4 Kbytes, makes it ideal for data storage as well, eliminating
the need for additional data storage EEPROM devices.
Features
• Single 2.7V - 3.6V Supply
• Serial Peripheral Interface (SPI) Compatible
– Supports SPI Modes 0 and 3
• 70 MHz Maximum Clock Frequency
• Flexible, Uniform Erase Architecture
– 4-Kbyte Blocks
– 32-Kbyte Blocks
– 64-Kbyte Blocks
– Full Chip Erase
• Individual Sector Protection with Global Protect/Unprotect
Feature
– Thirty-two 64-Kbyte Physical Sectors
• Hardware Controlled Locking of Protected Sectors
• Flexible Programming Options
– Byte/Page Program (1 to 256 Bytes)
– Sequential Program Mode Capability
• Automatic Checking and Reporting of Erase/Program Failures
• JEDEC Standard Manufacturer and Device ID Read Methodology
• Low Power Dissipation
– 5 mA Active Read Current (Typical)
– 10 µA Deep Power-down Current (Typical)
• Endurance: 100,000 Program/Erase Cycles
• Data Retention: 20 Years
• Complies with Full Industrial Temperature Range
• Industry Standard Green (Pb/Halide-free/RoHS Compliant) Package
Options
– 8-lead SOIC (150-mil and 200-mil wide)
– 8-contact MLF (5 x 6 mm)
