Description
The AT49F1024 and the AT49F1025 are 5-volt-only in-system Flash
memories. Their 1 megabit of memory is organized as 65,536 words by
16 bits. Manufactured with Atmel’s advanced nonvolatile CMOS
technology, the devices offer access times to 35 ns with power
dissipation of just 275 mW over the commercial temperature range.
When the device is deselected, the CMOS standby current is less
than 100 µA. The only difference between the AT49F1024 and the
AT49F1025 is the package.
Features
• Single-voltage Operation
– 5V Read
– 5V Reprogramming
• Fast Read Access Time – 35 ns
• Internal Program Control and Timer
• 8K Word Boot Block with Lockout
• Fast Erase Cycle Time – 10 seconds
• Word-by-word Programming – 10 µs/Word Typical
• Hardware Data Protection
• Data Polling for End of Program Detection
• Small 10 x 14 mm VSOP Package
• Typical 10,000 Write Cycles
