LDX-020A Carbide saw blade front and rear Angle grinder for
woodworking
Do TCT saw blades need a fully automatic grinder:
1,TCT saw blade as an industrial consumable, sawing for a long
time, there will be many problems: such as blunt head, cutting is
not sharp enough; There are lines and burrs on the surface of the
cutting workpiece, and the material loss is larger; The sawing
sound is noisy and uneven; The serrations are not sharp causing the
cut to be smoky and so on
2,Because the cutting workpiece requirements are relatively high,
worried about the quality of the workpiece cut out after the alloy
saw blade grinding, so adhere to the principle of only buying new
films, saw blades never grinding, which makes the customer's sawing
cost is very high; Some customers complained to us that the saw
blade had been polished in other manufacturers before.
3,But it is not that your cutting requirements are high, nor is it
really bad to use the alloy saw blade after grinding, but you did
not find the right manufacturer, this is the key! Alloy saw blade
after professional factory grinding, it can be used as a new film,
help you reduce the sawing cost by more than 50%!
| Technical parameter: |
| Processing saw blade diameter range: ￠100- ￠800mm |
| Saw blade aperture: ￠ 10-220mm |
| Saw blade thickness (steel plate): 1-12mm |
| Tooth pitch: 7-100mm |
| Tooth surface angle: 5 degrees to+20 degrees |
| Tooth top back angle: 1-20 degrees |
| Left and right inclination of teeth: tooth tip/tooth surface 20
degrees |
| Blade grinding stroke range: maximum 25mm (adjustable) teeth/minute |
| Grinding speed: 0.5-6mm/s |
| Working speed: maximum 20 teeth/minute |
| Grinding wheel size (outer diameter x hole): (￠ 125mm x ￠ 32mmX1mm) |
| Negative chamfer grinding: -15 degrees |
| Grinding wheel linear speed: 26m/s |
| Flow rate of coolant water pump: 501/min |
| Volume of coolant cylinder: 85L |
| Total power: 1.85 kW |
| Voltage: three-phase 380v |
| Mechanical weight: 700KG |
| Mechanical dimensions (length x width x height): 1500X1100X1700mm |
| Technical features: |
1. This equipment can grind aluminum TCT cutting alloy saw blades
and woodworking saw blades. It is easy to operate and can fully
extend the service life of TCT saw blades. Each blade can be reused
15-30 times. This equipment has received praise from many buyers.
|
