LDX-Carbide saw blade manual high frequency tooth welding machine
TCT saw blade welding How to make welding easier:
1,The welding technology of the alloy is very superb, it is
different from the welding of common metals such as iron and steel,
the adhesion of the alloy is very poor, and the grain must be fully
welded.
2,The working conditions of carbide saw blades are relatively
harsh, high speed, vibration, high temperature on the welding of
the alloy cutter head put forward harsh requirements, with the
cutting speed of the saw blade and the continuous improvement of
the amount of feed, the requirements for the weld strength of the
carbide saw blade are also getting higher and higher, the
development of tungsten carbide saw blade brazing technology is
also changing with each passing day.
3,Resistance brazing, induction brazing, separate manufacturing
machinery Mosaic. General Trending manufacturing small size milling
or turning tools, its J: art characteristics can avoid the steel
matrix and the matrix material linear expansion coefficient
difference caused by the thermal tension,
Technical Parameters: |
| 1. Tooth diameter range: ¢100-¢800mm |
| 2. Maximum input power: 4KW |
| 3. Oscillation frequency: 100-250KHZ |
| 4. Heating current: 200-400A |
| 5. Holding current: 200-400A |
| 6. Input voltage: single phase 220V 50HZ |
| 7. Load continuation rate: 80% |
| 8. Heating, heat preservation and cooling time: 0.1-9.9S |
| 9. Cooling water requirement: 0.2MPa 2L/min |
| 10. Weight: 18KG |
| 11. Volume: 850 long X600 wide X1000high |
| Application: Carbide saw blade welding, etc. |
