LDX-028A Factory direct sales Hard TCT saw blade grinding machine
How to maintain the gear grinding machine:
1,Regarding the protection of the hydraulic system, when the
machine tool is used for a period of time, the viscosity and other
performance indicators of the hydraulic oil will be affected, and
the cleanliness of the oil will also decline.
2,According to the regulations, the hydraulic oil is precipitated
and filtered once in a month or so, and replaced once in three
months, which can improve the service life of the hydraulic
components, and check the solenoid valve, pressure valve, throttle
valve, relief valve and pressure relay.
3,The electrical system is mainly a number of control components,
such as relay output, input interface, electrical box module, cable
floor immersion protection, to check these components regularly,
cable as far as possible to go elevated line, do not fall, to avoid
other signal suspension.
| Technical parameters: |
| Saw web machining diameter range:￠100-￠800mm |
| Saw web bore diameter: 12-220mm |
| Thickness of saw web (steel plate):1-7mm |
| Tooth pitch: 5-80mm |
| Front inclination angle, inclination angle: 5°-15° |
| Radial angle: 3°-15° |
| Operating speed: 18 teeth/min |
| Feeding stroke: 1-28mm (stepless variable speed) |
| Grinding wheel dimensions: 80*100*32mm |
| Grinding speed: 26m/s |
| Coolant pump flux: 501/min |
| Coolant cylinder volume: 90L |
| Total power: 4.3KW |
| Voltage: Three-phase 380v |
| Weight: 1,100KG |
| Outer diameter dimensions: 1.75*1.4*2.0mm |
| Technical characteristics: |
An intuitive and simple whole Chinese operation interface is
matched with a large-sized touch screen, so the equipment is easier
to operate, and all preset procedures or self-compiled procedures
are more convenient to call; the servo tool setting device features
accurate positioning, so the product grinding accuracy is greatly
ensured. Due to the adoption of high-quality and high-accuracy
castings and machined parts, the service life of the equipment is
greatly prolonged, and the equipment is simple and easy to operate
and maintain; one person can operate many pieces of equipment at
the same time, so the production efficiency is greatly improved,
and the cost is reduced.
|
