LDX-026A Full CNC TCT saw blade front and rear Angle grinding
machine
Gear grinding machine detailed introduction:
1,If the grinding wheel seat of the machine tool enables the
grinding wheel to enter the inner gear workpiece, the inner gear
can be ground
2,The forming wheel grinding machine has simple layout, high
efficiency and accuracy up to 5, which is suitable for mass
production. Forming wheel The grinding wheel of the gear grinding
machine is trimmed into teeth shape on the axial section by the
forming wheel dresser.
3,Especially suitable for gears with few teeth. Saw blade grinding
head feed slide speed is not uniform or impact phenomenon,
indicating that the hydraulic speed control valve is faulty, remove
the speed control valve to clean or replace.
4,The angular speed imbalance of the automatic saw blade grinder is
that the angular speed is too small or the angular force is too
fast, causing the angular pendulum impact force to be too large to
make a huge sound, and the positioning cylinder pressure is too
large, and the throttle valve should be adjusted. Left and right
swing Angle throttle set flow is not appropriate, should adjust the
throttle.
| Main Technical Parameters : |
| Range of external diameter of processing:￠100-￠800mm |
| Inner bore of saw blade:￠10-220mm |
| Thickness of saw web (steel plate):1-8mm |
| Pitch range:7-100mm |
| Tooth face angle:5°~+30° |
| Tooth top dorsal angle:6-45° |
| Tooth left/right gradient: Tooth top/tooth face 45° |
| Cutter grinding stroke range: Max. 25mm (adjustable) teeth/min |
| Grinding speed:0.5-6mm/s |
| Working speed: Max. 20 teeth/min |
| Grinding wheel dimensions (outer diameter * bore):
(￠125mm*￠32mmX1mm) |
| Negative chamfer grinding: -27° |
| Grinding head rotation angle: 90° and 180° |
| Grinding speed: 26m/s |
| Coolant pump flux:501/min |
| Coolant cylinder volume: 85L |
| Total power: 2.2KW |
| Voltage:three-phase 380v |
| Total weight of equipment:900KG |
| Appearance(Long*Width*Height):1500X1300X1800mm |
|
| Technical features: |
| This machine is designed in reference to the features of domestic
and foreign similar types, which absorbs and analyzes the
advantages of the same type and improves the functions to some
extent at the same time. |
|
| 1. Preset many groups of tooth types and one-key multifunctional
operation. |
2. Trapezoid flat teeth can be finished at a time, features CNC
grinding and arbitrary tooth types, and can improve the efficiency
by 3 times; due to the adoption of improved tooth extraction
operation, the accuracy is improved, and the service life is
prolonged.
|
