All the types in this new design (11D) series are installation
compatible with the previous design (10D). Note, however, that
there is no longer compatibility for some of the seal components
between the IPH-3 and IPH-4 sizes and the 3 and 4 sizes.
1) Configured with the high-pressure, low-noise IPH Series and IP
pumps, these double pumps greatly expand the range of appliSAARion
for the IP pump.
2) A wide selection of pump combinations provides options that are
perfect for just about any type of appliSAARion imaginable.
Note) 1.Maximum Pressure: Maximum pressure limit when there are
frequent pressure changes. However, maximum pressure is the same as
rated pressure when load is applied to the head
side and shaft side simultaneously.
2. Suction Pressure: +0.02 to +0.3 MPa {−0.2 to +0.3 kgf/cm2}
3. Avoid installation with the suction port towards the bottom of
the pump. If the revolution speed will exceed 1800mm-1, provide
separate piping for shaft side and head size IN ports.
4. Specify using the model number format shown below when pipe
flange is required.
5. Working pressure is continuous operating pressure when the same
pressure exists on the head side and shaft side.
6. Individual pump perform performance on the head side and shaft
side is the same as that of the single pumps. Required power is the
sum of the power required by each of the two
pumps.
7. The "Required Power at 1200min-1, 21MPa (kW)" column in the
above table are based on combinations that provide the maximum
capacity for each model number, when pressure at
both the head side and shaft side is 21MPa. Examples of
combinations that provide "the maximum capacity for each model
number" are IPH-22B-8-8-11 for IPH-22b, and IPH-46B-32-
125-11 for IPH-46B. A capacity of 125 for all *6B Type 6 pumps is
used for calculations.
SAAR specialized in pumps, motors, valves, bearings, couplings,
gearbox, engine spare parts, filter elements, fittings, connectors,
electronic components and accessories, mobile equiupment spare
parts.
Nachi IPH Series Double Gear Pumps on Sale, Short lead time, Best
price!!!
| IPH-22B-3.5-3.5-11 |
| IPH-22B-3.5-3.5-L-11 |
| IPH-22B-3.5-5-11 |
| IPH-22B-3.5-6.5-11 |
| IPH-22B-3.5-8-11 |
| IPH-22B-5-5-11 |
| IPH-22B-5-6.5-11 |
| IPH-22B-5-8-11 |
| IPH-22B-5-8-L-11 |
| IPH-22B-6.5-6.5-11 |
| IPH-22B-6.5-8-11 |
| IPH-23B-3.5-10-11 |
| IPH-23B-3.5-13-11 |
| IPH-23B-3.5-16-11 |
| IPH-23B-5-10-11 |
| IPH-23B-5-13-11 |
| IPH-23B-5-16-11 |
| IPH-23B-6.5-10-11 |
| IPH-23B-6.5-13-11 |
| IPH-23B-6.5-16-11 |
| IPH-23B-8-10-11 |
| IPH-23B-8-13-11 |
| IPH-23B-8-13-LT-11 |
| IPH-23B-8-16-11 |
| IPH-24B-5-25-LT-11 |
| IPH-24B-5-32-L-11 |
| IPH-24B-6.5-25-11 |
| IPH-24B-6.5-25-L-11 |
| IPH-24B-6.5-32-11 |
| IPH-25B-5-40-11 |
| IPH-25B-8-80-LT-11 |
| IPH-26B-3.5-80-L-11 |
| IPH-26B-8-125-LT-11 |
| IPH-26B-8-80-11 |
| IPH-33B-16-16-11 |
| IPH-34B-10-20-11 |
| IPH-34B-10-32-11 |
| IPH-34B-13-25-LT-11 |
| IPH-35B-13-50-L-11 |
| IPH-35B-13-64-11 |
| IPH-35B-13-64-LT-11 |
| IPH-35B-16-50-LT-11 |
| IPH-36B-10-125-11 |
| IPH-36B-13-80-11 |
| IPH-36B-16-125-11 |
| IPH-44B-20-25-11 |
| IPH-44B-20-25-LT-11 |
| IPH-45B-20-64-L-11 |
| IPH-45B-32-40-11 |
| IPH-46B-25-100-LT-11 |
| IPH-46B-32-132-LT-11 |
| IPH-55B-40-40-11 |
| IPH-55B-40-50-11 |
| IPH-55B-40-64-11 |
| IPH-55B-50-50-11 |
| IPH-55B-50-64-11 |
| IPH-55B-50-64-LT-11 |
| IPH-55B-64-64-11 |
| IPH-56B-40-100-11 |
| IPH-56B-40-125-11 |
| IPH-56B-40-125-LT-11 |
| IPH-56B-40-80-11 |
| IPH-56B-50-100-11 |
| IPH-56B-50-100-LT-11 |
| IPH-56B-50-125-11 |
| IPH-56B-50-80-11 |
| IPH-56B-64-100-11 |
| IPH-56B-64-125-11 |
| IPH-56B-64-80-11 |
| IPH-66B-100-100-11 |
| IPH-66B-100-125-11 |
| IPH-66B-125-125-11 |
| IPH-66B-80-100-11 |
| IPH-66B-80-125-11 |
| IPH-22B-8-8-11 |
| IPH-24B-3.5-20-11 |
| IPH-24B-3.5-25-11 |
| IPH-24B-3.5-32-11 |
| IPH-24B-5-20-11 |
| IPH-24B-5-25-11 |
| IPH-24B-5-32-11 |
| IPH-24B-6.5-20-11 |
| IPH-24B-8-20-11 |
| IPH-24B-8-25-11 |
| IPH-24B-8-32-11 |
| IPH-25B-3.5-40-11 |
| IPH-25B-3.5-50-11 |
| IPH-25B-3.5-64-11 |
| IPH-25B-5-50-11 |
| IPH-25B-5-64-11 |
| IPH-25B-6.5-40-11 |
| IPH-25B-6.5-50-11 |
| IPH-25B-6.5-64-11 |
| IPH-25B-8-40-11 |
| IPH-25B-8-50-11 |
| IPH-25B-8-64-11 |
| IPH-26B-3.5-100-11 |
| IPH-26B-3.5-125-11 |
| IPH-26B-3.5-80-11 |
| IPH-26B-5-100-11 |
| IPH-26B-5-125-11 |
| IPH-26B-5-80-11 |
| IPH-26B-6.5-100-11 |
| IPH-26B-6.5-125-11 |
| IPH-26B-6.5-80-11 |
| IPH-26B-8-100-11 |
| IPH-26B-8-125-11 |
| IPH-33B-10-10-11 |
| IPH-33B-10-13-11 |
| IPH-33B-10-16-11 |
| IPH-33B-13-13-11 |
| IPH-33B-13-16-11 |
| IPH-34B-10-25-11 |
| IPH-34B-13-20-11 |
| IPH-34B-13-25-11 |
| IPH-34B-13-32-11 |
| IPH-34B-16-20-11 |
| IPH-34B-16-25-11 |
| IPH-34B-16-32-11 |
| IPH-35B-10-40-11 |
| IPH-35B-10-50-11 |
| IPH-35B-10-64-11 |
| IPH-35B-13-40- |
| IPH-35B-13-50-11 |
| IPH-35B-16-40-11 |
| IPH-35B-16-50-11 |
| IPH-35B-16-64-11 |
| IPH-36B-10-100-11 |
| IPH-36B-10-80-11 |
| IPH-36B-13-100-11 |
| IPH-36B-13-125-11 |
| IPH-36B-16-100-11 |
| IPH-36B-16-80-11 |
| IPH-44B-20-20-11 |
| IPH-44B-20-32-11 |
| IPH-44B-25-25-11 |
| IPH-44B-25-32-11 |
| IPH-44B-32-32-11 |
| IPH-45B-20-40-11 |
| IPH-45B-20-50-11 |
| IPH-45B-20-64-11 |
| IPH-45B-25-40-11 |
| IPH-45B-25-50-11 |
| IPH-45B-25-64-11 |
| IPH-45B-32-50-11 |
| IPH-45B-32-64-11 |
| IPH-46B-20-100-11 |
| IPH-46B-20-125-11 |
| IPH-46B-20-80-11 |
| IPH-46B-25-100-11 |
| IPH-46B-25-125-11 |
| IPH-46B-25-80-11 |
| IPH-46B-32-100-11 |
| IPH-46B-32-125-11 |
| IPH-46B-32-80-11 |
| IPH-66B-80-80-11 |
