SDS2MS Digital Display Meter And Ka-300 Linear Grating Ruler For
Lathes And Precision Grinders
The SDS 2MS AC 100-240V digital DRO 2-axis KA300 linear glass scale
grating ruler system comes with the following features:
Dual-axis DRO: This kit allows you to see and manage the machine's
movement in two axes at the same time, such as the X and Y axes of
a milling machine. This makes it easier for you to assess how well
the equipment is operating.
Magnetic ruler encoder system: The KA300 linear ruler encoder
system uses magnetic technology to provide accurate and reliable
readings. Position feedback and work progress are continuously
tracked by the magnetic balance mounted on the machine shaft and
the DRO display device.
Enhanced Components:
1.One is linear error correction.
2.Nonlinear error correction is the second.
3. Turn off the memory.
4. There is no change in tempo.
The Digital DRO 2 axis Readout details
1. An AC voltage range of 50 to 60 Hz, 85 to 250 volts.
2. 15 watts of power were consumed at 25 volts.
3. The number should be denoted by a coordinate, two coordinates,
and three coordinates.
4. Display symbols that produced data information by signing eight
meters words and seven displays (two or three axes).
5. Net Weight: 1.3 kilos/2.9 lbs.
6. The input signal is a simple TTL interface with an open
collector output signal conforming to EIA-422 and a programmable
controller.
Packaging List :
| 1 PC | 2 Axis digital readout SDS2MS |
| 1 PC | Transparent cover |
| 1 PC | Instruction Manual (English) |
| 1 PC | Cable |
Product image /photos:
The rack in the picture is optioned, not standard product.
