SDS2ms Digital Display Table And Ka-300 Linear Grating Ruler For
Metal Processing And Milling Machines
The following features are available in the SDS 2MS AC 100-240V
digital DRO 2-axis KA300 linear glass scale grating ruler system:
Dual-axis DRO: With this kit, you may simultaneously monitor and
control the movement of the machine in two axes, for example, the X
and Y axes in a milling machine. This enables you to evaluate the
equipment's working state with clarity.
Magnetic ruler encoder system: To produce precise and trustworthy
readings, the KA300 linear ruler encoder system makes use of
magnetic technology. The DRO display device and the magnetic
balance mounted on the machine shaft continuously track position
feedback and work progress.
Enhanced Components:
1.One is linear error correction.
2.Nonlinear error correction is the second.
3. Turn off the memory.
4. There is no change in tempo.
The Digital DRO 2 axis Readout details
1. An AC voltage range of 50 to 60 Hz, 85 to 250 volts.
2. 15 watts of power were consumed at 25 volts.
3. The number should be denoted by a coordinate, two coordinates,
and three coordinates.
4. Display symbols that produced data information by signing eight
meters words and seven displays (two or three axes).
5. Net Weight: 1.3 kilos/2.9 lbs.
6. The input signal is a simple TTL interface with an open
collector output signal conforming to EIA-422 and a programmable
controller.
Packaging List :
| 1 PC | 2 Axis digital readout SDS2MS |
| 1 PC | Transparent cover |
| 1 PC | Instruction Manual (English) |
| 1 PC | Cable |
Product image /photos:
The rack in the picture is optioned, not standard product.
