| Detail Information | | Application: | Sanitary Industry | Name: | Brass Casting Machine |
|---|
| Voltage: | 380V/50Hz | Condition: | New,100%New |
|---|
| After-sales Service Provided: | Engineers Available To Service Machinery Overseas,Video Technical
Support,Field Maintenance And Repair Service,Field Installation | Warranty: | 1 Year |
|---|
| High Light: | aluminium pressure die casting machine,low pressure die casting process |
|---|
|
Product Description
In low pressure casting process molten metal is filled directly
from the holding or casting furnace into the die or sand mould from
below, with low turbulence and with an absolutely controlled filled
casting process.
Low pressure die casting machines for brass for the casting of
sanitary fittings, faucets, water meter or valve bodies.
To fulfill the different capacity requirements, a full range of
machines with one or two manipulators and one, two or three riser
tubes can be supplied. We deliver a freely programmable Siemens
control.
- ADVANTAGES
1. Cost-efficient production
1.1. Multiple dies
1.2. Reduced melting loss
1.3. Increased yield (less circulating material)
1.4. One-man operation
1.5. Cost savings in subsequent stages of manufacture
1.6. For robot grinding low pressure die casting is a must
2. Humanization of the workstation
2.1. Ergonomic design of the workstation
2.2. Minimizing of smoke, heat, noise and danger of accidents
3. High quality castings and high-precision repeatability
3.1. Automated casting
3.2. Oxide inclusions in the casting are prevented by feeding metal
from inside the melt through the riser tube
Fully automatic machine on a single steel frame with one
manipulator mounted on a linear transfer device and one furnace for
the cost-effective production of high-quality casting products.
1) Capacity per shift (8 hours): approx. 380 castings
2) This machine with its automatic operation of the complete low
pressure die casting process is highly suitable for the mass
production of casting products with a very short die changing time.
3) Specifications:
A. manipulator on a linear guiding device
B. Manually setting of the cores
C. Max die dimensions: 550 x400 mm
D. Quick die change flanges
E. Simple furnace control electrics
F. Die cooling and coating in a blackwash bath
Fully automatic machine with two manipulators mounted on a rotary
turning device and one furnace for the cost-effective production of
high-quality casting products.
1) Capacity per shift (8 hours): approx. 760 castings
2) Fully automation of the low-pressure die-casting process, short
mold change time and flexible application, which is very suitable
for mass casting production;
3) Specifications
A. 2 manipulators on a rotary device, operated independently.
Operating Parameters can be edited independently. Two manipulators
either work at the same time; or one set changes the die, or the
other set is under maintenance.
B. Manually setting of the cores
C. Max die dimensions: 600 x400x240 mm
D. Quick die change flanges
E. Simple furnace control electrics
F. Die cooling and coating in a blackwash bath
G. Different die castings are equipped with separated feeders,
graphite baths and manipulators.
H. Large furnace melting rate, capacity is up to 700kg/h, for the
operation with 2 manipulators working together.
I. Drive by servo motor, with high precise, stable and efficiency
performance.
FAQ
Q: could you please arrange the installation and commissioning ?
A: Yes , we could and the buyer pay the charge
Q: could you arrange the production education?
A: Yes , we could and the buyer pay the charge
Q:How long the guarantee?
A: one year and charge for repair the whole life.
