Product description
1x32 Multi Channel Single mode and Multimode Optical Switch fiber optical switch
Any 1xN configuration, Any fiber type, Wide band working wavelength, 1x32 Multi Channel optical switch is a kind of light path control equipment,can realize multi-channel fiber optic light path switching,In optical fiber transmission system, it is used for multi-channel fiber monitoring, multi light source/ detector selection, and optical fiber path protection etc. Besides, it is also used in optical fiber test system for optical fiber and its component test, outdoor cable test and multi-port optical sensors monitoring system.
Feature
1.a kind of functional component, with the ability of switching optical route.
2. 1 input and N output fiber ports that selectively transmits, redirects,
3.or blocks optical power in a fiber optic transmission line.
4. bi-directional and can be used in either the 1xN or Nx1 direction.
5. designed for use in optical fiber communication networks and measurement instruments.
Specification
| Parameter | Unit | 1x4 | 1x8 | 1x12 | 1x16 | 1x24 | 1x32 | 1x64 | 1x128 |
| Wavelength Range | nm | 1260~1650 |
| Testing Wavelength | nm | 1310/1550 |
| Insertion Loss (Typical) | dB | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 | 1.0 |
| Insertion Loss (Max) | dB | ≤0.8 | ≤0.8 | ≤1.0 | ≤1.0 | ≤1.0 | ≤1.0 | ≤1.0 | ≤1.2 |
| Return Loss | dB | SM ≥ 50 |
| Crosstalk | dB | ≤-70 |
| PDL | dB | ≤0.05 |
| WDL | dB | ≤0.20 |
| TDL | dB | ≤0.20 |
| Repeatability | dB | ≤0.02 |
| Lifetime | times | >107 |
| Switching Time | ms | ≤10 (Adjacent Channel) |
| Optical Power | mW | ≤500 |
| Control Mode | / | TTL or Customized |
| Operating Temperature | ℃ | -10~+55 |
| Storage Temperature | ℃ | -40~+85 |
| Module type Dimensions | mm | 135x64x32 | 135x60x37 | 184x78x66 | 184x156x66 |
Ordering Information OSW-XxX-X-XX-X-XX-XX-XX-XX
| OSW | Mode | Wavelength | Package | Fiber Type | Fiber Diameter | Fiber Length | Connector |
| 1x4 1x8 1x16 1x32 1x64 1x128 S=Specity | S=SM M=MM | 85=850nm 13=1310nm 15=1550nm 85/13=850/1300 13/15=1310/1550nm S=Specify | B=Metal Box S=Specify | M5=50/125 M6=62.5/125 S9=9/125 S=Specify | 25=250um 09=900um S=Specify | 05=0.5m 10=1.0m S=Specify | 00=None FP=FC/UPC FA=FC/APC SP=SC/UPC SA=SC/APC LP=LC/UPC LA=LC/APC S=Specify |
PIN Configurations
DB-9 male connector (1xN≤16) Optical Switch
| DB-9 male connector |
| Pin No. | I / O | Signal | Description |
| 1 | Input | D0 | D0~ D3 is channel selection Bit0~Bit3,D0 is low, D3 is high |
| 2 | Input | D1 |
| 3 | Input | D2 |
| 4 | Input | D3 |
| 5 | Input | RESET | TTL, Low level reset to channel 0. High level means channel selection bits are effective. |
| 6 | Out | READY | TTL, Ready (High=Not ready, Low=Ready) |
| 7 | Out | ERROR | TTL, Error OR Failure , (High=Error, Low=No error) |
| 8 | Power | GND | Ground |
| 9 | Power | VCC | 5.0±5% VDC Power Supply (max 500mA) |
DB-15 male connector (1xN≤128) Optical Switch
| DB-15 male connector |
| Pin No. | I / O | Signal | Description |
| 2 | Input | D0 | D0~ D5is channel selection Bit0~Bit4,D0 is low, D4 is high |
| 3 | Input | D1 |
| 4 | Input | D2 |
| 5 | Input | D3 |
| 6 | Input | D4 |
| 10 | Input | D5 |
| 11 | Input | RESET | TTL, Low level reset to channel 0. High level means channel selection bits are effective. |
| 7 | Out | READY | TTL, Ready (High=Not ready, Low=Ready) |
| 8 | Out | ERROR | TTL, Error OR Failure , (High=Error, Low=No error) |
| 1,9 | Power | GND | Ground |
| 12 | Power | VCC1 | 5.0V±5% VDC motor power (max 950mA) |
| 15 | Power | VCC2 | 5.0V±5% VDC Drive circuit power(50mA) |
| 13,14 | | NC | NC |
Shipping
Q1:Can I have a sample order? What is your MOQ?
A1:Sample order is welcome to test and check quality. We don't MOQ, 1pcs sample is available. Also Mixed samples are acceptable.
Q2: What's the Lead time?
A2: The normal lead time is about 1week, For big quantity and special products. Please check lead time with our sales representative. But we keep stock for some products, could ship 1-3 days after receiving payment.
Q3: What are the payment terms?
A3: Payment term: T/T, Paypal, Western union,cash payment, ALI etc.
Q4: What is your warranty time
A4: 3 years' warranty.
Q5: Could I use our own logo, label and package?
A5: Yes, we could provide OEM service which according to your requirements, design products label, logo, PN, SN, package.
Gezhi Photonics (Shenzhen) Technology Co., Ltd.
Gezhi Photonics Co., Ltd is committed to being a global influential
organization in optical network devices area.
Gezhi Photonics is a leading worldwide manufacturer and supplier of
Fiber Optical Passive Component. Our Mainly item is CWDM/DWDM,AWG
Module,Optical Switch with OEM/ODM service .
Gezhi Photonics keeps on cooperating with international and
national universities, scientific-research units as well as taking
advantage of its social talent, information and technology to
benefit Enterprise Development. Owing to our excellent engineering
services, custom design, technical support, product review, rapid
sample prototyping and mass production fast delivering for our
customers, we service more than 30 countries and regions including
Europe, USA, Southeast Asian, Africa, Middle East, etc.
Having always taken the principle of innovation as its core merit,
Gezhi Photonics attaches great importance to the internal
management, boosting the development of the company with joint
creativity of the team. Emphasizing the harmonious innovation
atmosphere, a broad development platform is provided to the staff,
and also it is helpful for the development of the company in
product research, making the product always being at the advanced
level.
