High Temperature Resistant Carbon Fiber Board Extremely Strong And Durable

Extremely Strong and Durable High Temperature Resistant Carbon Fiber Board

Carbon fiber is an inorganic high-performance fiber with carbon content higher than 90%, which is transformed from organic fiber through a series of heat treatments. It is a new material with excellent mechanical properties. It not only has the inherent characteristics of carbon material but also has a soft and processable type of textile fiber. It is a new generation of reinforced fiber. Carbon fiber is a dual-use material, which belongs to the key material of technology-intensive and political sensitivity. It is the only material whose strength does not decrease in the high-temperature inert environment above 2000 ℃. The proportion of carbon fiber is less than 1 / 4 of that of steel, and the tensile strength of its composites is generally more than 3500MPa, 7-9 times that of steel. Carbon fiber has super corrosion resistance, and it can be safe in the "aqua regia" obtained by dissolving gold and platinum.

We use the battery box made of fiber composite materials to help you improve your travel efficiency tomorrow. Compared with traditional materials, their weight is greatly reduced, a longer range can be achieved, and other important requirements in safety, economy and thermal management can be met. We also support the new modern electric vehicle platform.

1. Performance: flat appearance, no bubbles and other defects, high-temperature resistance, acid and alkali salt resistance, and atmospheric environment corrosion resistance, high hardness, high impact strength, no creep, high modulus, low density, and low linear expansion coefficient.
2. Process: multi-layer carbon fiber cloth is pre-impregnated with imported epoxy resin and then laminated at high temperatures.
3. 3k, 12K carbon fiber, plain / twill, bright / matte,
4. Application: UAV model, aircraft, medical CT bed board, X-ray filter grid, rail transit parts, and other sporting goods, etc.

Our company produces carbon fiber boards with a high resistance of 200 ℃ - 1000 ℃, which can continue to maintain its physical properties in the environment with gradually rising temperatures. Its flame retardant level is 94-V0, which can achieve high-standard results without deformation.

Carbon Fiber Sheet Plate Specification:

Shanghai Lijin focuses on the Carbon Fiber industry and offers carbon fiber tubes, plates, and aluminum CNC services.

Being experienced in the carbon fiber applications for over 7 years, Shanghai Lijin manages customized production according to various industry standards. Shanghai Lijin started to keep in stock for some standard

sized and frequently ordered tubes and plates. This enables Shanghai Lijin to make prompt delivery. Not only

can Shanghai Lijin complete mass production orders in short period, we can even ship normal sample, prototype orders of Carbon Fiber Plate CNC parts in just SEVEN days after order confirmation when the

drawings are available. Shanghai Lijin is dedicated to solve any technical points during the production and new item developing to ensure the quality.

Carbon Fiber tube production is Shanghai Lijin’s core business and occupies 70% of our turnover.
The carbon fiber tubes Shanghai Lijin mainly produce is table-rolled and oven thermoset. The tubes can be Full Carbon or Carbon Fiber and Fiberglass composite, depending on the application, weight limit,mechanical

strength and surface requirement.Shanghai Lijin offers top quality ROUND carbon fiber tubes. The general OD tolerance we achieve is +/-0.10mm and it can be even +/-0.05mm after our special surface process.

The maximum length of the tube can be 5500mm.

Besides the traditional table-rolled carbon fiber tubes, Shanghai Lijin also offers REAL Filament wound carbon fiber tubes,which are widely used for mechanical strength like auto driving shaft, antennas, even for military

applications. The filament wound carbon tubes are wound at a certain angle like 30 or 45 degree. We invested the new production line from Jun 2013 and this increases Shanghai Lijin’s advantage in the carbon

fiber tube industry. There are just a few real filament wound carbon fiber tube manufacturers in domestic

China and we are one of them.
 

Since the rapid growth of UAV in the international market, instead of the standard plane like Phantom from DJI, RC fans are getting more interested in the customized multicopters. As carbon fiber is the most preferred

material for UAV, Carbon Fiber CNC parts demand is increasing. Shanghai Lijin sticks to offering OEM service for the international market, fine quality and prompt delivery.To ensure the thickness tolerance +/-0.10mm and minimum warp of the Carbon Fiber plates that are used for the cutting, Shanghai lijin execute high standard to

the plate production. For the normal thicknesses including 1.0mm, 1.2mm, 1.5mm, 2.0mm, 2.5mm, 3.0mm,
Shanghai Lijin keeps regular stock, to make sure the raw material will be available for cutting immediately when order is firmed.Experienced engineers are in Shanghai Lijin’s office ready to deal with different types of

drawings from customers. No matter the drawing formats are .DWG, .DXF that can be edited by AutoCAD

and used directly for production, 3D drawings like .IGS, or even draft drawings, our staff can do adjustment and change to customer’s idea. Our engineers are also good at English communication, Email and IM is easy

for them. Editing drawings for customers is FREE* of charge. Shanghai Lijin is having several professional CNC machines for carbon fiber cutting and drilling, with the capacity of cutting 20-50pcs standard full sized plate per day. The carbon fiber chassis general cutting tolerance Shanghai Lijin offer is +/-0.02mm. The

special designed cutting solution ensures the smoothness of the cutting edge.

‘Customers’ Persuit for Change, Lijin’s Motivation for Growth’, Shanghai Lijin takes customers’ demand for center, enhances the
customer satisfaction, and grows with customer.