Olycom L2+ Ring Managed Gigabit Industrial POE++ Switch
- 8 + 2 ports with 10/100/1000/2500Mbps data rate
- Jumbo frame programming at all bandwidth settings
- IEEE 802.3af/at/bt (15.4W/30W/60W/90W) power on to 1 ~ 8 RJ45
ports, 720W budget
- G.8032 V1/V2 Rapid Ring protocol compliant
- Support POE managed, enable/disable the POE ports, set the POE
power-on delay and POE output power
- Operating temperature range -40ºC to +75ºC
- Dual fiber/copper Uplink ports
- 6KV Ethernet surge protection, adapt to a harsh outdoor environment
- Tested for critical transportation and traffic applications
Specification
| Product Name | 10/100/1000Mbps Managed Industrial POE Fiber Switch |
| Model No. | IM-FP20808GW |
| Port | 2 x 1000Mpbs SFP port, 1G/2.5G both supportive
SM: 1310nm/1550nm,20Km; 1490nm/1550nm, 40~120Km
MM: 1310nm, 2Km; 850nm, 500 meters
8x10/100/1000M UTP RJ45(Support MDI/MDIX auto-sensing) |
| Standard | IEEE 802.3, IEEE802.3U, IEEE802.3ab, IEEE802.3z, IEEE802.1d STP,
IEEE802.1w RSTP, IEEE802.1s MSTP, ITU-T G.8023 EPR/Y.1344,
IEEE802.1Q, IEEE802.1X, IEEE802.3ad, IEEE802.3x, IEEE802.3af,
IEEE802.3at, IEEE802.1ad, IEEE802.1p, IEEE802.1ab, IEEE802.3az |
| VLAND ID | 4096 |
| Jumbo Frame | 9.6KB |
| MAC Address Table Size | 8K |
| Switching features | Transmission mode: Storage and forward
System bandwidth: 20Gbps (non-traffic jam) |
| Network media | 10BASE-T: CAT3, CAT4, CAT5 un-shielded twisted pair(≤100m)
100/1000BASE-TX: CAT5 or above shielded twisted pair(≤100m)
SFP port, transmission distance: 20Km, 40Km, 60Km, 80Km, 100Km |
| LEDs | Power, network, fiber |
| Power supply | POE power supply input voltage: 48V (max 52V)
Single PoE power supply output power: 15.4W (port 1~8)
(802.3at/bt standards required special instructions) |
Management Features
- Support STP, RSTP, MSTP, ITU-T G.8032 Ethernet Protection Ring(EPR)
- Support Qos, transport classification Qos, Cos, bandwidth control
- (input/output direction), storm suppression ,differentiated
services
- Support IEEE802.1q VLAN,VLAN port ,based Mac VLAN,IP subnet VLAN,
Protocol VLAN,VLAN convert, MVR
- Support dynamic IEEE802.3ad LACP link aggregation, static link
aggregation
- Support IGMP/MLD snooping V1/V2/V3, IGMP filtrating/ modulating,
IGMP searching
- Support IGMP agent report, MLD snooping
- Safety: based on port and Mac IEEE802.1X, RADIUS, ACL,
TACACS+,HTTP/HTTPS, SSL/SSH v2
- Support Cisco® like CLI, Web management, SNMP v1/v2c/v3, Telnet
- Support software upgrade via TFTP and HTTP, firmware redundancy
prevents upgrade failing
- Support DHCP client/Relay/Snooping/Snooping option 82/Relay option
82
- Support RMON, MIB II, mirror image, event log, DNS, NTP/SNTP,
IEEE802.1ab LLDP
- Support IPV6 Telnet server /ICMP v6, SNMP, HTTP, SSH/SSL,
NTP/SNTP,TFTP, QoS, ACL.
FAQ
Does your switch support 155Mb/s tranceivers?
A: Yes, the optical speed is 100M/1000M/2500M. Please just
configure 100M speed in the management interface, megabit modules
are working.
If possible to write the label as I want?
A: Yes, please just send the content and format, we will print a
sample piece for your confirmation.
The label is usually attached on the side panel.
Does the unit price include the fiber transceiver and power
adapter?
A: No, it is an industrial standard, but we have different options
for both.
What is the PoE output voltage?
A: Its DC48V for 802.3af/802.3at compliant powered devices such as
PoE cameras or PoE routers.
If the PD takes 24V power, then please use a PoE splitter to
connect our switch and powered device.
What SFP modules do I use?
A: In a standard cabling, singlemode 20KM and Multimode 2KM modules
are usually applied.
General Queries
Are you a manufacturer?
Yes, we have our production line and R&D team.
Please visit us via below VR link to see our office and production
area.
https://www.ecer.com/corp/uuu5b8d-industrialnetworkswitch/vr.html
What is the leadtime if I order?
After receiving the payment, we start production.
If you are ordering some popular models, we usually got stock.
After some testings, we will ship the materials.
If we do not have stock, production time is usually 3~5 working
days for less than 50pcs/pairs.
How will you ship my order?
We will send the goods by air(DHL, UPS or FEDEX) or by sea(for bulk
order)
It is fine to ship purchased items via customer’s shipping account
or forwarder.
It takes 3~5 calendar days to arrive at local customs for
clearance.
What is MoQ?
1 Pc/Pair.
For many models, we have stock, it is easy to send samples for your
testing.
Can I have a discount?
Yes and it is usually based on quantity and after sample testing.
What is your warranty period?
For commercial models like fiber
Ethernet media converter or fiber optic
PoE switch, it is 1 year.
For industrial grade products, it is 3 years.
We do lifetime technical support if the models are from Olycom
company.
Can I have my own packing box?
Yes, the standard packing box does have not have Chinese letters or
logo.
Its fine to customize your own version like putting your logo,
model name or slogans on it.
What is your payment terms?
In most cases we do T/T wire transfer and full amount should be
collected before shipment.
For sample orders, we receive PayPal payment for shorter processing
time.
Sometimes Alipay or WeChat payment is fine, it depends on the
cases.
