Industrial Optical Bypass Switch
D2*2B/D4*4B OEM/ODM DC24V input
Introduction of bypass switch
The Fiber Bypass has the characteristics of low loss, high
stability and high reliability. For different optical path needs,
optical switch modules can be customized to meet the optical path
needs of complex test systems and improve product test efficiency.
It is an indispensable core product for the monitoring and
protection of optical communication system, which can be connected
to high-density optical communication systems.
Key Features of industrial optical bypass switch
- Low Insertion Loss
- Wide Wavelength Range
- Low Channel Crosstalk
- Operating environment temperature: -20 ° ~70 ° c
Specification
| Product Name | Fiber Bypass |
| Power Interface | Standard industrial terminal block. |
| Polarity Protection | Support |
| Optical Fiber Interface | LC |
| Wavelength Range | 850±40/1300±40nm; 1260~1650nm |
| Test Wavelength | 850/1300nm; 1310/1550nm |
| Insert Loss | Typ:0.6 dB Max:1.0 dB ; Typ:0.6dB Max:1.0 dB |
| Return Loss | MM≥30 dB SM≥50 dB |
| Channel Crosstalk | MM≥35 dB SM≥55 dB |
| Polarization Loss | ≤0.05 dB |
| Wavelength Loss | ≤0.05 dB |
| Temperature Loss | ≤0.05 dB |
| Repeatability | ≤0.05 dB |
| Operating voltage | 3.3V-5V |
| Service life | ≥100000000 times |
| Switching time | ≤10 ms |
| Transmission optical power | ≤500 mw |
| Environment | Working temperature:-20°～ 70°C Storage temperature:-40°～ 85°C |
Application
Production Steps:
Welding: Weld the necessary components
Cleaning: To avoid any possible dysfunction due to dust or scraps on the
PCB boards.
Assembling: Builds up components of a product, like panels, screws, PCB
boards.
Testing: To make sure the product is basically working fine after
assembling
Aging: To check if the product can work smoothly for long time without
any minors such as LED indicators, voltage. This will usually last
for 24 to 48 hours.
Testing: To test if the product can process data or video signals
correctly. Any data loss? Transmission rate correct? Any data
packet failure? Such questions would be verified in this procedure.
QC testing: This is the third and also last check of product quality. If it
goes good, our packing staff will pack it up according to customer
requirements and attach to the packing box a product lable.
When all above is done, the product will go to market.
