Wearable Farming Sewage Lifting Lobe Pump With Convenient
Maintenance
Rotary lobe pumps
Accuvon is a specialist in rotary lobe pumps. We offer
solids-resistant rotary lobe pumps with flow rates of 1–24,000
l/min and a large selection of equipment and additional parts. The
pumps can be used as mobile, stationary or submerged versions.
Specifications:
| Description | Stainless steel lobe pumps |
| Rotor | NBR rotor |
| Seal | Mechanical seal |
| Axial and radial casing protection | High-strength steel , resistant to wear |
| Drive | Electric motor |
| Material of pump | GG25 |
| Pressure | 0-1.2 mpa |
| Flow | 26 m³/h |
| Power | 5.5 KW |
| Work efficiency | Up to 85% |
| Rate of flow | 1.125 l/rev |
| Self - priming | Up to 9.5m vertical / 30m horizontal |
| Medium | Manure |
| Custom printing | Acceptable |
Unrivaled Low Maintenance
Due to the cantilevered carrier design of the pump, the wear parts
stressed by the pumped media can be replaced through the
quick-release cover of the pump. All maintenance work can be done
without the need to remove piping and the drive system.
Outstanding Range Of Material
The correct selection of material is important for the durability
of a pump. For this reason, all components of our pumps are
available in different materials. Using a modular principle, the
most resistant material most suitable for the relevant pumped
medium is selected for each pump component, from the O-ring to the
pump casing.
Unique Block Design
Each rotary lobe pump is equipped with a non-segmented pump and
gear casing. This design reflects our high quality standard and
guarantees long service life with ease of maintenance. The pump
casing can be manufactured in cast iron, cast steel, stainless
steel, duplex steel or Hastelloy.
Variety Of Rotors
We offer a range of linear and screw rotors differentiated by
geometry and material. Whether made of NBR, EPDM, FKM, stainless
steel, steel or another material, we offer a suitable rotor for
your application.
Seal Selection
Our single- or double-acting mechanical seals are available in
different versions and materials. The seals can be replaced very
easily through the quick-release cover.
Unique Casing Protection
In order to prevent pump casing damage, e.g. due to abrasive or
aggressive fluids, Accuvon pumps are equipped with casing
protection. The unique casing liners and casing protection plates
are available in different materials.
Advantages
- Compact construction,high performance in a compact design,taking
less area than normal screw pump does (2/3~1/4 of which only)
- Convenient Maintenance in Place ,reduce the time of maintenance and
downtime.No need to disassemble the piping or lift machine..
Replacement of wear parts in the blink of an eye, in-situ by
service personnel.
- Smooth pumping action.
- Large bucket geometry and short passage through the pump provide a
smooth transfer of the pumped fluid.
- Can be used for delivery mixing gas,liquid,particle , big
lumps,fiber, hair, and never be blocked.
- Pump works in unrestricted reversible.
- High capacity of self-priming,maximum at 9.5 meters.
- With a Has a separated sealing cavity,keeping wet, which makes
short time running idle available when lacking medium.
- Suitable for transfer different medium, casing and rotor can be
customized according to client’s request.
Testing Photo
