Single-Ended Clock Output 10G Full Rate Error Meter
Summary of full rate error meter:
The full rate error meter is an instrument used to measure the bit
error rate in digital communication system. It can generate data
streams of various rates and detect the number of error codes at
the receiving end, thus evaluating the performance of the
communication system.
The full rate error meter usually has a variety of test modes,
including bit error test, frame error test and bit error rate test.
It can measure parameters such as bit error rate, bit error
distribution and bit error type to help users comprehensively
evaluate the performance of the communication system.
In addition, the full rate error meter can also be used to test the
performance of communication equipment, such as modems, digital
signal processors, optical fiber communication equipment, etc. By
simulating different communication environments and transmission
rates, it can detect the performance bottlenecks and potential
problems of the equipment, and provide strong support for the
optimization and improvement of the equipment.
Basic performance characteristics:
1, our-channel parallel PG and ED; Single-ended clock output.
2, One SFP optical port channel.
3, PG and ED support rates ranging from 0.622 to 11.7 Gbps.
4, Supported code type: PRBS7 / PRBS 9 / PRBS 15 / PRBS 23 / PRBS
31.
Specification
| No. | Argument | min | Model | Max | unit |
| 1 | Data rate | 0.622 | 0.622,1.25,2.5,5.0,9.953,10.00,10.3125,10.52,11.09,11.32,11.7 | 11.7 | Gbps |
| 2 | Number of channels |
| 5(4Electrical port, 1 optical port, PG and ED supported) |
|
|
| 3 | Code pattern |
| PRBS7,PRBS9,PRBS15,PRBS23,PRBS31 |
|
|
| 4 | Rise and fall time (20% to 80%) |
| 18 | 23 | ps |
| 5 | Pattern reversal |
| Supports signal inversion at the transmitting and receiving ends |
|
|
| 6 | Signal differential output amplitude | 200 | 600 | 1000 | mV |
| 7 | Data output jitter (RMS) |
| 1.5(10.3125G) |
| ps |
| 8 | Data input/output interface |
| Differential, AC coupling, 50 ohm impedance, SMA |
|
|
| 9 | Clock output | 100 | 156.25 | 156.25 | MHz |
| 10 | Data signal input sensitivity |
| 50 |
| mVpp |
| 11 | Data output eye crosspoint | 49 | 50 | 54 | % |
| 12 | USB HID response time |
| 10 |
| ms |
| 13 | Operating temperature | 10 | 25 | 50 | °C |
| 14 | Operating voltage (AC) | 180 | 220 | 250 | V |
