High Speed Zincalume Ondulado 7/8 Corrugated Wall Roof Sheet Making
Roll Forming Machine With Servo Following Cutting
The normal machinable thickness range of our roof panel roll
forming machine is 0.3mm-0.8mm, working raw material is Aluminum,
PPGI, Galvanized steel, Galvalume steel etc. We design the machine
according to your drawing, specially the pitch and height of each
wave. This machine is used to form the pre-painted sheet/GI
material to various roofing of the projects such as sports center,
exhibition center, subway project, airport and stadium etc.
Nu-Wave Corrugated is an economical, structural through-fastened
roof or wall panel suitable for general usage., hot sale in
Amercia.
Panel is ideal for roof ,vertical or horizontal wall applications,
soffit or interior accent panels.
32 inches coverage roof panel, 34 2/3 inches coverage wall panel.
Technical parameter:
Rolling Speed | 0-30m/min |
Feeding width | 1250mm |
Thickness | 0.3-0.7mm |
Control System | PLC |
Roller Stations | about 20 stations |
Roller Material | 45# forge steel, coated with chrome |
Motor Power | 11kw main motor+3KW servo motor |
Hydraulic power | 5.5kw |
Hydraulic Pressure | 12Mpa |
Tolerance | 1.5mm |
Power supplier | 380V, 60HZ,3 phase |
Way Of Drive | 1.2 inch single chain |
Machine weight | about 12 tons |
Machine List
| Machine list | 5 tons hydraulic de-coiler | 1 set |
| Main roll forming machine | 1 set |
| PLC Control box | 1 unit |
| Hydraulic station | 1 unit |
| Safety cover | 1 set |
| Spare parts | 1 set |
working flow
Profile Drawing
This drawing shows the drawing of ONDULADO-48, is not only popular
in Chile, also in Africa, South Africa, the Philippines, Indonesia,
Thailand and etc.
The length after corrugation is 1000mm, the height wave is 14mm or
18mm, we can customized the wave size and total length according to
your demand.
Machine Shows
Application:
