Manufacturer Customize Durable Safe PP Material Reusable Heat Packs
Hand Warmers
Instructions For Heat Pack Products
This is a storage pack that needs heating,The inner material of
this product is solid at room temperature,It needs to be heated by
microwave oven or boiled water, and the heat storage material
inside should be melted completely as far as possible, so as to
absorb heat to the maximum extent and making the heat preservation
time longer.
Matters needing attention for microwave heating:
1. Set the microwave on medium to high heat, not more than 5
minutes.In the process of heating, if you find the plastic box drum
phenomenon, please immediately stop heating, to avoid the plastic
box rupture, polluting the microwave furnace.(Note : About 3 minutes is appropriate, you know the temperature of
the microwave oven is very high, the box will melt and burst over
time.)
2. To avoid burns, bring gloves when you remove them from the
microwave (Because the temperature about 70-80 degrees)
3. After removing from the microwave, check whether the internal
material has completely melted. If not, please continue to heat for
30 seconds at a time.When the heat storage material is completely
melted, it can be put into an insulated bag or insulated cooler box
with food that needs to be insulated.
Matters needing attention for boiling water heating:
Put the product into hot water(more than 60 ℃ hot wate). After 10
minutes, check whether the internal heat storage material has
completely melted. When all melted, take it out, it can be put into
an insulated bag or insulated cooler box with food that needs to be
insulated.
The range of application:
Applicable to school, work to carry lunch, outdoor activities,
tourism, take-out lunch need to keep the temperature field. Add a
layer of flannel, can used for heating in winter.
Product show
Packing :
| Package | - Nude packing
- Each in opp bag/polybag/shrinking wrapped/printed gift box/display
box/PVC bag/Shrink box or any other packaging as your request
- Customized packing is acceptable.
|
| Shipping | By sea | Any carrier |
| By air | Fedex,DHL,UPS or other logistics |
| Freight and container quantity | Please contact me
|
Our Services
Accept Customize Products
- Based on your design open a new mould
- Color: any panstone; Material: HDPE plastic
- Logo:Engraving
- Sample time:10 days after
- Artwork format:AI,PDF,ect
- Mass production lead time:15-20days
Accept Customize Packaging
- Type: label,display box,opp bag,shrink film,ect.
- Material:Paper, carton etc
- Sample time: 7 days after design be confirmed
- Artwork Format: AI, CorelDRAW,Photoshop, PDF, etc.
Related type products
Other type products
- Medical cool boxes
- Breast Milk cooler bags
