Description of 5-2337992-3 MagJacks:
1. Connector Material:
Housing: Lcp Black Ul94 V-0
Insert: Lcp Black Ul94 V-0
Shield: Brass
Shield Plating: Nickel
Contact: Copper Alloy
Contact Plating: Selective Gold, Min. 0. 76hm (30 μ Inch) In
Contact Area.
Over Min. 1. 27hm (50μInch) Nickel
Solder Pin Plating: 3. 05hm (120μInch) Tin 0ver 1. 27hm (50μI Nch)
Nickel Overall
Shielding Pin Plating: Nickel
2. Pin Not Electrically Connected May Be Omitted
3. Rj45 Cavities Conform To T0 Fcc Rules And Regulation Part 68,
4. The Part Is Recommended For The Reflow Soldering Process Peak
Soldering: Temperaturemax. +260° C, Max. 10s
5. Operating Temperature: T= -40° C To +85°C
6. Storage Temperature: T= -40° C To +85° C
7. Unless Otherwise Specified,See Table For All Dimensions
Tolerances
8. Jack Conf Iguration: 1 X 1
Tab Direction: Up
9. Packaging: Tray
5-2337992-3 Electrical Parameters :
| Product Series | PoE RJ45 Magjack |
|---|
| Turn Ratio | (P1~ P2):(J1~J2) = 1:1土2% @1 00kHz
(P3~ P6):(J3~J6) = 1:1士2% @1 00kHz |
| Primary Inductance | 350μH MIN. @100kHz,0.1V 8mA DC BIAS |
| DC Resistance | 1.2 0HMS MAX. |
| Insertion Loss | 1 -100MHz:-1.2dB MAX. |
| Return Loss | 1- 30MHz:-16dB MIN.
30- 60MHz:-12dB MIN.
60- 80MHz:- 10dB MIN. |
| CROSS TALK | 1 -100MHz:- 27.1dB MIN. |
| COMMON TO COMMON MODE ATTENUATION | 1-100MHz:- 30dB MIN. |
| Isolation | PHY Side to Line Side: 500VAC |
| DC CURRENT/VOLTAGE RATING-PSE PINS | 720mA @57V(CONTINUOUS) |
Applications of 5-2337992-3 RJ45 with Integrated Magnetics:
• Industrial Communications & Ethernet
• Industrial Machinery
• Industrial Production Equipment
• Automated Test Equipment
Shielded RJ45 Jack Functions:
Shielded RJ45 Jack with integrated Magnetics feature brass shells,
providing continuity for EMC (Electromagnetic Compatibility)
applications. When mated with corresponding shielded RJ45 plugs,
shielding and grounding continuity are achieved. When the shield
solder tines are soldered to the PC board they provide electrical
continuity to any ground path on the PC board and, where
applicable, panel ground tabs on the shield provide electrical
continuity to any ground path through the equipment panel.
