China Industrial TFT Display 13.3 Inch, 13.3 Inch FHD Resolution
Industrial Capacitive Touch LCD Monitor Product Description
SFTO1330JD-7057A-CT TFT LCD display is a 13.3 inch color active
matrix TFT LCD module using amorphous silicon TFT‘s (Thin Film
Transistors) as an active switching devices. SFTO1330JD-7057A-CT
TFT LCD display module has a 13.3 inch diagonally measured active
area with Full-HD resolutions (1920 horizontal by 1080 vertical
pixel array). Each pixel is divided into RED, GREEN, BLUE dots
which are arranged in vertical stripe and this module can display
16.7M(Round up)(6bit+2FRC) colors and color gamut 72%. The LED
driver for back-light driving is built in this model.
SFTO1330JD-7057A-CT TFT LCD display is demostrating graphics and
texts on a 1920×3×1080 dotspanel with16.7M colors by using eDP
(Embedded Display Port) Ver1.2 interface and supplying+3.3VDC
supply voltage for TFT-LCD panel driving.In this
SFTO1330JD-7057A-CT TFT LCD display panel, color filters for
excellent color performance is incorporated to realize brighter and
clearer pictures, making this display optimum for use in
multi-media applications.Optimum viewings are in all
directions.Without Backlight-driving LED controller. EDP transfer
rate specification: 2.7Gbps/2 lane 8bit.
* Reserve Type
* eDP interface
* High-speed response
* 6-bit (Hi-FRC) color depth, Display 16.7M colors
* Incorporated edge type (LED) backlight
* Compatible with RGB98% and NTSC72%
* High luminance and contrast ratio, low reflection and wide
viewing angle
* DE ( data enable ) only
* Rohs and Halogen free
* TEO 6.0, ES6.0 Compliant
* Gamma Correction
Features:
| Keywords: | 13.3 Inch Industrial TFT Display |
| Resolution: | 1920*1080 Pixels |
| LCD With Touch: | 327.2 X 215.2 X 6.3 Mm (with Touch) |
| LCD Interface: | EDP |
| Touch Screen: | CTP (Projective Capacitive Touch Screen) |
| LCD Size: | 305.1 X 178.5 X 2.45 Mm (w/o Touch) |
| Active Area: | 293.76 X 165.24 Mm |
| CTP Interface: | USB |
| Surface Luminance: | 300 Cd/m2 - 1000 Cd/m2 |
| Operating Temp.: | -10℃ To +60℃ |
| Storage Temp.: | -20℃ To +60℃ |
| Surface Treatment: | Haze 25%, 3H |
| Display Color: | 16.7 M |
| Certificate: | ISO9001:2015 / ISO1400:2015 |
| Display Type: | IPS Full Viewing Angles |
| Contrast Ratio: | 1000 |
| LED Lifetime: | 30,000 Hours |
| Compliance: | REACH & RoHS Compliant |
China Industrial TFT Display 13.3 Inch, 13.3 Inch FHD Resolution
Industrial Capacitive Touch LCD Monitor Product Drawing
Display Pin Definition
1 NC No connection
2 H-GND Ground
3 LAN1_N Complement Signal Link _Lane1
4 LAN1_P True Signal Link _Lane1
5 H-GND Ground
6 LAN0_N Complement Signal Link _Lane0
7 LAN0_P True Signal Link _Lane0
8 H-GND High Speed Ground
9 AUXP True Signal Link _Auxiliry Channel
10 AUXN Complement Signal Link _Auxiliry Channel
11 H-GND Ground
12 LCD_VCC Power Supply, 3.3V (typ.)
13 LCD_VCC Power Supply, 3.3V (typ.)
14 BIST Panel self test enable
15 H-GND Ground
16 H-GND Ground
17 HPD HPD(Hot Plug Detect) Signal Pin
18 BL_GND High Speed Ground
19 BL_GND High Speed Ground
20 BL_GND High Speed Ground
21 BL_GND High Speed Ground
22 BL_EN Backlight on/off Control pin
23 BL_PWM Back light PWM Dimming
24 NC No connection
25 NC No connection
26 BL_PWR Backlight power
27 BL_PWR Backlight power
28 BL_PWR Backlight power
29 BL_PWR Backlight power
30 NC No connection
PCAB USB Pin Definition
1 VCC
2 USB-
3 USB+
4 GND
China Industrial TFT Display 13.3 Inch, 13.3 Inch FHD Resolution
Industrial Capacitive Touch LCD Monitor Product Image
Factory Facilities and Certificates
Projected Capacitive (PCAP) touch
Projected Capacitive (PCAP) touch technology offers a fast and
sensitive response and professional-grade reliability combined. The
SAEF
technology projected capacitive touch screen is designed for strict
industrial, medical, and automotive applications. We can also
combine PCAP touch screens with liquid crystal displays (LCDs),
which is an integrated embedded solution that helps simplify the
supply chain and assembly.
Cover Glass:
1. Shape: Custom sizes, shapes, edge treatments, holes and cut-outs
2. Color: Silk printing, Logo
3. Glass material: Gorilla Glass, Tempered Glass, PMMA
4. Treatments: Mirror, AG, AR, AF
Sensor:
1. Sensor Material: Glass, Film, Film+Film
2. FPC: Shape design optional
3. IC: EETI, ILITEK, SIS, Cypress, Focaltech, Goodix and so on
4. Interface: I2C, USB, RS232
Introduction of touch screen OCA Bonding materials
With the development of technology, more and more of our electronic
devices, especially the development of touch screens, are getting
higher and higher for the optical materials for the structure of
optical bonding, which are required to have colorless transparency,
light transmittance of more than 98%, good bonding strength, can be
cured at room temperature or medium temperature, and have the
characteristics of small curing shrinkage, this adhesive is called
optical adhesive. Optical adhesives made of different materials
such as silicone, acrylic resin, unsaturated polyester,
polyurethane, epoxy resin, etc.
1. What is OCA
OCA (Optically Clear Adhesive) is a double-sided adhesive tape
without matrix material obtained by making optical acrylic glue
into no substrate material, and then laminating a layer of release
film on the upper and lower layers.
2. Advantages of OCA
High cleanliness, high light transmittance, low haze; The thickness
of the adhesive layer is uniform and the flatness is high; High
adhesion and high bonding strength after lamination; Soft to soft,
soft to hard, hard to hard can be fitted, and the fit material has
a wide applicability.
3. OCA production company
3M and tesa are the main ones, and the 3M production capacity is
mainly occupied by traditional LCD manufacturers for a long time,
and basically occupies the highest-end market; Mitsubishi and Nitto
Denko from Japan, South Korea is LG Chem and SKC from South Korea.
4. What is OCR
OCR (Optical Clear Resin) is a kind of optical glue, because the
glue is in a liquid state, it is also known as liquid optical glue,
optical water glue or LOCA. After curing, the glue is colorless and
transparent, with a light transmittance of more than 98%, and has
the characteristics of small curing shrinkage and yellowing
resistance. In the field of optical lamination, compared with
traditional OCA tapes, OCR has unique advantages in large size,
curved surfaces, harsh environments and other fields.
5. Advantages of OCR/LOCA
1) Strong applicability, one glue can correspond to a variety of
laminating products;
2) Liquid glue has strong fluidity, is not sensitive to ink
thickness, and has good gap filling;
3) It is suitable for large-size lamination, and there is no
restriction on the size of the laminating product;
4) It is suitable for surface lamination or complex structure
lamination;
5) High lamination yield and good rework performance;
6) Chemical bonding, the bonding is less affected by temperature,
and the bonding stability is strong.
6. OCR/LOCA production companies are: Wacker, Henkel, Momentive, DuPont;
SAEF Technology is committed to providing complete solutions for
functional materials for the smart and touch industries, and has
developed high-sensitivity silicone OCR products for touch screens
that are used in the optical lamination process of display
components such as cover glass, touch sensors and LCD modules. The
combination of silicone OCR and A/R glass perfectly solves the
problem of light loss in the air layer between the touch screen and
the display panel, which can increase the contrast by 400% in
sunlight and improve the visibility of the touch screen inside and
outside. Silicone OCR for high-sensitivity touch panels can be used
for a long time in the range of -50-200°C, which improves the
reliable performance of the display and thus extends the life of
the display product. Compared with frame-mounted components,
silicone OCR/LOCA for high-sensitivity touch screens can also
reduce the impact of external impacts, improve impact resistance
and bending strength, and increase the reliability of touch
screens. Liquid silicone OCR enables a wide range of product
adhesion thicknesses, better fills gaps between inks and coatings,
and enables thinner designs.
Contact Us
We love to hear about your projects, If you have any questions, we
can be reached at sales2@saef.com.cn
