Revolutionize Your Power Management Strategy With CNM Series Rack-Mounted Modular UPS

Modular UPS adopts standard structural design, each system consists of a power module, monitoring module, and static switch. The power modules can be connected in parallel to share the load evenly among them. In case of failure, it will automatically exit the system and other power modules will take the load, which can be expanded both horizontally and vertically. The unique redundant parallel technology makes the equipment without a single point of failure to ensure the highest availability of power supply. All modules can be hot-plugged and replaced online, and maintenance is the safest power protection solution.

Multiple operating modes

The product has a variety of systems to choose from, easy to operate, and can be realized in a variety of inlet and outlet modes: 1/1, 1/3, 3/1, or 3/3, input frequency can be set to 50Hz and output frequency can be set to 60Hz, the output voltage can be set to 220V, 230V, 240V, if you configure the input and output transformers to meet the global scope of all countries and regions of power supply needs.

Small size, high power density

High working efficiency and high power density are the most important features. It can provide 5KVA (4000W), 10KVA (8000W), 15KVA (12KW) and 20KVA (16KW) power output.

Expandability, easy to install, maintain, replace, and upgrade

The model consists of various modules, which can realize the function of hot plugging and dialing. The rack of each module can be completely separated, which is convenient for users to expand or reduce the capacity in the future, and easy to use. Online replacement and online maintenance can be realized, which reduces the difficulty of maintenance and the time of maintenance. The size of each module is designed by the standard 19-inch structure, so that the appearance of the whole machine is consistent with the standard rack, beautifying the appearance of the machine, and the module can be common with the standard rack.

Redundancy, decentralized parallel logic control

Parallel control between the modules adopts decentralized logic control, no host and slave, any one module dial out or insert will not affect the normal work of other modules, on-demand N +1, N + X redundancy system, reducing the risk factor of the system itself and the load is the load by the UPS to protect the time of the overall increase. Not only increases the reliability of the whole machine but also simplifies the user's maintenance difficulties.

First, "modular redundant parallel" technology to avoid waste of resources. In the industry users of the information network power supply system construction, often on the high-end UPS capacity to produce the wrong, or too low or too high expectations, the results may lead to high procurement costs, can not meet the load needs or cause resources, space and energy waste and so on. Modular UPS through the expandable module structure effectively solves this problem, it can help users in future development is not clear in the case of phased construction and investment.

Second, high security, easy to maintain the hot-swap technology breaks through the application bottleneck. Traditional high-end UPS during routine maintenance, equipment maintenance is required to take the way to turn bypass, and the load in this case is not protected by the UPS. Therefore, if power interruption, overload and other faults occur at this time, will cause serious losses, and its maintenance process will be relatively cumbersome, and unfavorable time. Modular UPS systems used in the hot-swap technology can allow a single module without the need for power outages under the premise of arbitrary entry or exit from the parallel unit, thus realizing the parallel system of online maintenance, while no special instruments or techniques can be carried out.

Third, the power phase multiple system technology reduces procurement and management costs. Traditional high-end UPS power input and output phases are fixed, so users often increase the number of UPS to take into account the different phases and capacity in the construction of the power supply system. Under the modular UPS system, the power supply phase multiple system technology can be used to change the constraints caused by the past unity, the user no longer needs to consider how to purchase different phases or capacities of the UPS products to adapt to the needs of the system.

• Data centers
• ​
• Telecommunications networks
• ​
• Industrial facilities
• ​
• Medical facilities
• ​
• Financial institutions
• ​
• Government agencies
• ​
• Educational institutions