This machine is suitable for industries such as rubber and
plastics, paper products, color printing and packaging, adhesive
tapes, bags and handbags, textiles, pharmaceuticals, daily
chemicals, food, wires and electronics. It can test the physical
properties of various materials, finished products, and
semi-finished products. You can choose various fixtures to do
tensile, compressive, holding, holding, bending, tearing, peeling,
adhesion, and shear tests.
This machine is a microcomputer-type tensile (compression) force
testing machine newly designed and developed by Dazhong Company.
The company has completely changed the shortcomings of the
traditional material testing machine, which is bulky, complicated
to operate, and single in performance. The structure adopts the
aluminum extruded sealing plate treated with high-grade paint, with
built-in high precision, low resistance, Taiwan TBI ball screw and
guide column; measurement and control system The data acquisition
and calculation speed are high, the product performance is stable
and reliable, the measurement accuracy is high, and the operation
is simple and easy to understand.
Machine Features:
★The machine includes a thermal printer, which can automatically
output the test results;
★Units can be switched at will: power: kN/N/kgf/gf/t/lbf,
Displacement: mm/cm/in;
★Automatic homing function;
★ Overload protection function can be set;
★ Various test methods such as fixed load and fixed displacement.
| Capacity Selection | 10, 20, 50, 100, 200KG optional (American Transmission) |
| Force Measurement Accuracy | Better than ±1.0% |
| Force Resolution | 1/10,000 |
| Effective Force Range | 1~100%F.S. |
| Displacement Resolution | 0.001mm |
Accuracy of Displacement Indication | Better than ±1.0% |
| Test Speed Range | 100～500mm/min, can be adjusted arbitrarily |
| Test Maximum Stroke | Maximum 600mm, without fixture |
| Effective Test Space | Front and rear 120mm, left and right ∝ |
| Power Unit Switch | kgf, gf, N, kN, Ibf |
| Stress Unit Toggle | MPa, kPa, kgf/cm2, Ibf/in2 |
| Morph Unit Toggle | mm, cm, in |
| Shutdown Mode | Upper and lower limit safety setting, emergency stop button, test
piece damage detection |
| Machine Size | 50×45×130cm(W×D×H) |
| Machine Weight | About 75kg |
| Power | Taiwan TECO Servo Motor |
| Power Supply | AC220V, 50/60Hz, 10A or specified |
Test Screen:
