Inverter Charges Battery Bank Temperature Sensor 47K 4100 For
Quattro MultiPlus inverter chargers GX devices Cerbo GX Venus GX
Ampfort Temperature Sensor for new Energy Quattro, MultiPlus
inverter/chargers and also Compatible with GX devices (Cerbo GX,
Venus GX, etc)
This is a spare part to suit a range of new Energy inverters and
inverter charges that have a dedicated temperature sensing input
The new Energy temperature sensor connects directly to either pole
of the battery and monitors the temperature of the battery bank
The temperature measurement is used to adjust battery capacity to
temperature (which is extremely important to prolong battery life)
The available battery capacity decreases with temperature, the
inverter will also vary the charge current based on temperature
Monitors water temperature | Make sure to match against the current
one as different sizes are made for different machines | Fits model
specific washers
It is important to disconnect your washing machine from the power
and water supply before servicing.
for Quattro, MultiPlus and GX Device
| NO | Material Name | Material and Specifications |
| 2-1. | Housing | Dual hole M3(Stainless Steel) |
| 2-2. | EPOXY FILLING | NB-5 BLACK |
| 2-3 | Element | R25=47KΩ±5% B25/85=4100K±2% |
| 2-4. | Tube | Black thermal sleeve |
The application of temperature sensor on inverter products
"The photovoltaic power generation system is mainly composed of
solar batteries, batteries, controllers and inverters. The
temperature sensor is essential in the photovoltaic power
generation system. With it, it will automatically detect the
temperature and air temperature of the solar panel. It is said that
the battery temperature is detected by the external temperature
sensor in the battery ultra -temperature protection controller. The
overheating protection of the controller is to detect the
temperature through the internal sensor to achieve automatic
protection. The resistance, temperature sensor and current can
detect the operation of the core and the outside world at any time.
"Experts in the fields of temperature sensors such as Ishizuka,
Zhipu, Daquan, Huagong High -rational and Ampfort told researchers at the Temporary Sensor Research Institute.
In summary, the main role of photovoltaic inverters is to transform
the DC electricity emitted by photovoltaic components into AC
power. As an electronics product, the main components are
structural parts and electronic devices. The structural parts are
not afraid of low temperature. Electronic devices have resistance,
capacitors, inductors, relays, display screens, fans, power switch
tubes, sensors, CPU chips, etc. The low temperature resistance of
the device is different, and the low temperature of the inverter
depends on these components.
| Fan | LCD Screen | Electrolytic capacitor | Film capacitor | Relay | Inductor |
| Operating temperature | -10 ~ +70C | -30 ~ +80C | -30 ~ +105C | -50 ~ +105C | -40 ~ +125C | -25 ~ +130C |
| Storage temperature | -30 ~ +70C | -30 ~ +80C | -40 ~ +105C | -50 ~ +105C | -40 ~ +105C | -25 ~ +80C |
As the core part of the photovoltaic power station system, the
inverter not only has the function of DC electroconent AC power,
but also feeds the information of the entire power station. The
inverter requires 9 major protection. Warm protection.
Usually the working environment of photovoltaic inverters is
outdoors. In the face of changes in temperature differences,
humidity, storms, etc., the inverter itself is a test. It is used
to measure and control its own temperature and humidity. When the
temperature is too high, the inverter stops or reduces the output
to protect the stable operation of the equipment. Therefore, this
link is essential, so as to professional and effectively ensure the
long -term stable operation of the equipment. "
"According to the power size, the number of inverters is used,
usually a few points:
1. On the relay, there are many epoxy thermistor and small wires on
the market. The surface of the relay is close to the surface of the
relay, and there is the pile of the relay;
2. Together inductance, DC bus capacitance, AC filter capacitor,
and electrical resistance should be used to use NTC temperature
sensors;
3. On theIGBT substrate, use the installation of the hole -type NTC
temperature sensor with a short line length.
4. In the circular temperature detection, the NTC temperature
sensor should be used. "
Ampfort, who has been operating customers, has some experience. "The maximum
operating temperature of Ampfort temperature sensor can reach 150 degrees. When the temperature
sensor detects the temperature of the IGBT radiator exceeding the
limit, the inverter disconnects the communication contactor. We can
customize the resistance, length, and connectors according to the
customer's requirements. "
Recommend Products
EG33121505,6323EN1001E ,6323EN1001F,6323EN1001G,PT3-51F
| No. | OE# | Replacement Name |
| 1 | TS5L | Linear Temperature Sensor Replacement Pool and Spa Commercial
Automation Control Systems |
| 2 | GLX-PC-12-KIT | Water/Air/Solar Temperature Sensor Replacement for Hayward |
| 3 | 520272 | Pool Temperature Sensor Thermistor Air/Water/Solar 20' Feet Cable
for Jandy |
| 4 | 7790 | Jandy Aqualink RS Temperature Sensor |
| 5 | 3150144 | Meat Probe Thermometer Gauge Thermistor Replacement for Whirlpool,
Sears Kenmore Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef,
Admiral, Norge, Roper Range Oven, Baker, Microwave |
| 6 | DA32-00006W | Refrigerator Defrost Temperature Sensor Compatible Replacement Part
- Compatible with Samsung Refrigerator |
| 7 | W10131825 | Oven Temperature Sensor Replacement for Whirlpool RBS305PRB00 Oven
- Compatible with WPW10131825 Temperature Sensor |
| 8 | 12001655 | Oven Temperature Sensor Replacement Part- Exact Fit for Whirlpool
Kenmore Ovens - Replaces AP4009009 74004943 PS1570174 12001554
12001656VP 7430P003-60 |
| 9 | 12001656 | Range Oven Sensor Temperature Sensor AP4009456 New |
| 10 | 9755542 | Meat Temperature Probe |
| 11 | 42002-0024S | Stack Flue Sensor Replacement Pool and Spa Heater Electrical
Systems for Pentair Sta-Rite, MasterTemp, Max-E-Therm |
| 12 | 42002-0025S | 140F Automatic Gas Shutoff Switch Replacement Pool and Spa Heater
Electrical Systems |
| 13 | 42001-0053S | Thermistor for Sta-Rite, MasterTemp, Max-E-Therm Heaters |
| 14 | 42001-0063S | High Limit Switch Replacement Part |
| 15 | R0456500 | Replacement for Jandy/Zodiac Temp Sensor for Spa |
| 16 | 471566 | Thermistor Probe Replacement Pool/Spa Pump and Heater |
| 17 | Raypak 009577F | Temperature Sensor Lid Units Compatible with Raypak Heaters 206A,
207A, 266A, 267A, 336A, 337A, 406A, 407A |
| 18 | 3312303005 | AC Thermistor Freeze Control Sensor Replacement for Dometic RV Air
Conditioner |
| 19 | 3851210025 | Thermistor for Dometic Refrigerator, Compatible with RM2551 /RM2551
/RM2554 /RM2607 /RM2611 Other Dometic RM Series Models |
| 20 | 297018400 | Refrigerator Thermistor Temperature Sensors Fit for Electrolux
Frigidaire Fridge Replace 25314772100 25314772100 |
| 21 | 242278801 | Frigidaire - Electrolux 242278801 - Thermistor Assembly |
| 22 | IDXLTER1930 | Hayward H-Series Heater Thermistor |
| 23 | PB-39P350 | Replacement RTD Temperature Sensor Probe for Pit Boss P7 Series
Vertical Smoker |
| 24 | FDXLTER1930 | Thermistor Replacement for Hayward Universal H-Series Low Nox Pool
Heater Models h150fdn/fdp, h200fdn/ fdp, h250fdn/fdp, h30fdn/fdp,
h350fdn/fdp, h400fdn/fdp |
| 25 | DG32-00002B | Range Oven Temperature Sensor Probe - Exact for Samsung and LG Oven
Parts # EBG61305805 DG32-00002A 6322B62214A PS4240743 PS11732697 |
| 26 | W10833885 | Oven Temperature Sensor Fit for Whilpool Kenmore Range Oven
Thermistor Probe |
| 27 | 63318 | SCHAERER USA CORP 63318 Temperature Sensor, W/Plug |
| 28 | 61342 | NTC Temperature Sensor Probe Replacement For Commercial Coffee
Espresso Machines Grinders Steam Wand 3370061342 |
| 29 | H1 | Replacement Temperature Probes for Wireless BBQ/Oven Thermometers -
Cappec, iGrill, iGrill2, iGrill3, iGrill Mini, and Thermopro
(Ambient and Meat Probe with Clip) |
| 30 | H17 | Replacement Temperature Probes Wireless BBQ/Oven Thermometers X |
