L2 Managed Industrial bt PoE Switch 10 Port Full Gigabit Dual DC
Power Input
Technical parameters
| Interface Characteristics |
| Fixed Port | 1*RS232 console port (115200,N,8,1) 2*100/1000Base-X uplink SFP ports (Data) 8*10/100/1000Base-T bt PoE ports (Data/Power) 2 set of V+, V- redundant DC power interface (6 Pin Phoenix
terminal) |
| Ethernet Port | Port 1-8 support 10/100/1000Base-T auto-sensing, full/ half duplex MDI/ MDI-X self-adaption |
| Twisted Pair Transmission | 10BASE-T: Cat3,4,5 UTP(≤100 meters) 100BASE-TX: Cat5 or later UTP(≤100 meters) 1000BASE-T: Cat5e or later UTP(≤100 meters) |
| SFP Slot Port | Gigabit SFP optical fiber port, default no include optical modules
(optional single-mode/ multi-mode, single fiber/ dual fiber optical
module. LC) |
| Optical Cable/ Distance | Multi-mode: 850nm/ 0-500m Single-mode: 1310nm/ 0-40km, 1550nm/ 0-120km. |
| Chip Parameter |
| Network Protocol | IEEE802.3 10BASE-T, IEEE802.3i 10Base-T, IEEE802.3u 100Base-TX IEEE802.3ab 1000Base-T, IEEE802.3z 1000Base-X, IEEE802.3x |
| Forwarding Mode | Store and Forward(Full Wire Speed) |
| Switching Capacity | 20Gbps |
Forwarding Rate@64byte | 14.88Mpps |
| CPU | 416MHz |
| DRAM | 1G |
| FLASH | 128M |
| MAC | 8K |
| Buffer Memory | 4M |
| Jumbo Frame | 9.6K |
| LED Indicator | Fiber port: L/A (Green), PoE: PoE (Green) Power: PWR (Yellow), System: SYS (Yellow), Network: Link (Yellow) |
| Reset Switch | Yes, (Press and hold for 10 seconds and release, the switch will
restore the factory settings) |
| PoE & Power Supply |
| PoE Port | Port 1 to 8, IEEE 802.3 af/at/bt |
| PoE Management | Port PoE working status display Port PoE output priority configuration PoE power supply total power limit configuration Power delay start, PoE work and time scheduling Port PoE output power distribution, PoE on/off, af/at/bt power
distribution |
| Power Supply Pin | 1/2(+)3/6(-) 4/5(+)7/8(-) |
| Max Power Per Port | 90W, IEEE 802.3 af/at/bt |
| Power Consumption | Standby<8W, Full load<480W |
| Working Voltage | DC48-57V, 6 Pin industrial Phoenix terminal, support anti-reverse protection. |
| Power Supply | No, optional 48V/240W or 48V/480W industrial power supply |
| Physical Parameter |
| Operation TEMP / Humidity | -40°C~+80°C, 5%~90% RH Non condensing |
| Storage TEMP / Humidity | -40°C~+85°C, 5%~95% RH Non condensing |
| Dimension(L*W*H) | 165*148*54mm |
| Net /Gross Weight | <0.8kg / <1.2kg |
| Installation | Desktop, 35mm DIN rail |
Product overview
L2+ managed industrial bt PoE switch with 8*10/100/1000M RJ45 ports
and 2*100/1000M uplink SFP ports. Port 1-8 support IEEE 802.3
af/at/bt PoE standard. It can support dual DC power input and DIN
rail mounting.
Product featurer
Gigabit access, SFP fiber port uplink
◇ Support non-blocking wire-speed forwarding.
◇ Support full-duplex based on IEEE 802.3x and half-duplex based on Backpressure.
◇ The combination of RJ45 port and SFP fiber port allows users to flexibly build networks to meet the networking
needs of various scenarios.
Intelligent PoE power supply
◇ PoE network management, realize PoE port power allocation, priority
setting, port power status viewing, time scheduling, etc.
◇ 8*10/100/1000Base-T RJ45 ports can support bt PoE power, meeting
the demand for super high power PoE power supply in various
scenarios.
◇ The max output power of single-port POE is 90W, and the backwards
compatibility IEEE 802.3 af/at PoE standard, automatically identify
PoE devices for power supply, and not damage non-PoE devices.
Strong business processing ability
◇ Support ERPS ring network and STP/RSTP/MSTP to eliminate layer 2
loops and realize link backup.
◇ Support IEEE 802.1Q VLAN, users can flexibly divide VLAN according to
needs, support Voice VLAN and QinQ configuration.
◇ Support static and dynamic aggregation to effectively increase link bandwidth,
realize load balancing, link backup, and improve link reliability.
◇ Support QoS, port-based, 802.1P-based and DSCP-based three priority
modes and four queue scheduling algorithms: Equ, SP, WRR, and
SP+WRR.
◇ Support ACL to filter data packets by configuring matching rule
processing operations and time permissions, and provide flexible
security access control policies.
◇ Support IGMP V1/V2/V3 multicast protocol and IGMP Snooping to meet multi-terminal
high-definition video surveillance and video conference access
requirements.
Security
◇ Support port isolation.
◇ Support port broadcast storm suppression.
◇ Support IP+MAC+port+VLAN quadruple flexible combination binding
function.
◇ Support 802.1X authentication to provide authentication functions
for LAN computers, and control the authorization status of
controlled ports according to the authentication results.
Product picture
Packaging & Shipping
● All of our package are international standard package
● We will deliver our products as soon as the order confirmed
