450w powerful 8 channels outdoor Jamming and Detecting integrated
system
Drone detection introduction Description:
The UAV detection module is used as a UAV detection and processing
platform for UAV detection and identification. Its principle is
based on spectrum sensing and artificial intelligence technology to
identify and classify the UAV's flight control link and image
transmission link.
Features:
1) Small and light, easy to install;
2) Passive detection, no electromagnetic environmental pollution,
environmentally friendly;
3) Real-time detection of UAV signals in the environment, and early
warning of UAV intrusion;
4) Modular design, strong scalability and independent operation
6) The sensitivity, attack duration and RTC time of the device can
be configured and queried;
7) Output signals to control the countermeasure equipment, and can
control the duration of signal transmission, so as to ensure the
continuous strike time of the countermeasure equipment;
8) When the equipment fails, the corresponding error code will be
displayed to remind the user of the cause of the error, so as to
quickly troubleshoot.
9) Display the installation position
Multiple units can be used online
Show UAV Frequency range.
Specification:
| Number | Index | Parameter | Notes |
| 1 | Detect drone types | DJI series drones, traversing drones, and DIY image transmission
drones | |
| 2 | Detection frequency band | 860-930MHz , 1.2G,1.4GHz,2.4GHz,5.2GHz, 5.8G | |
| 3 | Detection distance | distance(m) | Antenna gain(dBi) | The target aircraft is DJI MAVIC air2 |
| 1-5km | 3-5 |
| 4 | Volume | 167mm*83mm*42mm(L*W*H) | |
| 5 | Weight | (500±5)g | Without antenna |
| 6 | Protection level | IP40 | |
| 7 | Working temperature | -20 ~ +60℃ | |
| 8 | Identify response time | ≤5s | |
| 9 | Supply voltage range | 9-36V | |
| 10 | Power dissipation | 5.5±0.5W | |
Drone Jammer introduction:
Drone Jammer is the ultimate outdoor anti-drone solution. It’s
safe, simple to operate and can be installed at houses, offices,
airports or Military important places easily. The device uses
focused electronic counter measures to block the drone’s control,
GPS and video signals while minimizing the impact on other local
devices. It comes with Omni directional antennas to disrupt 7
frequencies used by the majority of commercial drones. With a
radius range of up to 3 km. With multiple power outputs the
operator can choose if they want the drone to return to home or
land. The device does no harm to the drone or its operator. Most
commercial drones use 2.4GHz or 5.8GHz for their control and video
transmission frequencies.
Technical Parameters:
| Channel | Working frequency | Output power(±1.5dBm) |
| 2.4G | 2400-2500MHz | 51dBm (100W) |
| 2.4G | 2400-2500MHz | 47dBm (50W) |
| 5.8G | 5725-5850MHz | 47dBm (50W) |
| 5.8G | 5725-5850MHz | 47dBm (50W) |
| GPS L1 | 1550-1620MHz | 47dBm (50W) |
| 5.2G | 5150-5350MHz | 47dBm (50W) |
| GPS L2 | 1170-1280MHz | 47dBm (50W) |
| 900 | 860-930MHz | 47dBm (50W) |
| Total 8 band, output power: 450W |
| Power Consumption : 1000W |
| Power supply: AC220V, DC24-28V |
| Main engine weight : 45Kg |
| Size: 513×462×233mm |
| With omni antenna 8pcs , |
| Jammer Module Number : | 8 |
| Cooling System: | Systematic Smart Cooling System |
| Jamming Source : | Noise Technology |
| Humidity: 30%-95% |
| Running temperature : -20℃ to +65℃ |
| Omni Jamming range: 1 - 3km, according to signal density of mobile
network |
Advantage:
1. Detection range 1-5 km, Jamming range: 1-3km.
2. It can detect more than 10 drones at the same time;
3. Counter multiple targets at the same time;
4. Monitor the surrounding drone signals in real time and detect
drones in advance;
Work modes: unattended and manual.
Full Lists:
1.Main Device *1
2.Omni Fiberglass Antenna of jammer *9pcs
3. Detection Antenna *2pcs
4.Network Cable *1
5.Power Supply Cable *1
6. Laptop *1
