SV-FTER high-speed steel Internal Cold floating reamer holder Automatic Centering Adjustable Floating Hinge Shank Holding 2-16mm
product description
The internal structure of the floating reamer holder can realize
continuous axial deflection and radial translation, so that the
clamped tool center can always float 360 ° radially around the
center of the machine tool spindle in its vertical plane. The
deviation between the tool center and the center of the hole to be
machined is repaired, and the repositioning error of the tool is
eliminated, so that the tool center is consistent with the center
of the hole to be machined in the whole processing process.
Applicable machine tools: lathe, milling machine, machining center,
drilling machine, special machine
Can solve the following problems:
1. The size of the hole is too large, and the dimensional accuracy
cannot be achieved.
2. The middle of the hole is large, and the two ends are small and
cannot meet the required cylindricity.
3. It is difficult to ensure consistency in aperture size during
mass production.
4. The reamer is not durable.
product specification
product image
