Diamond segments for sandstone block & slab cutting
Sandstone segment is used for cutting sandstone, . The sandstone
material is soft and easy to break the slab edge. Therefore, the
sharpness requirements are very high. The sandstone segment
produced by Linsing diamond segments is extremely acceptable, and
our products can easily cut the Australian and Indian sandstone.
Not only that, in terms of price and style, K-shape and M-shape
segments also have strong cutting performance for special
sandstones.
Linsing diamond segments features:
1. The segments has good sharpness and high efficiency at the
process of cutting, meanwhile, it has a long lifespan.
2. Good cutting result: Smooth cutting, flat surface and even size.
3. Stable cutting, narrow cutting gap, stone waste reduction.
4. M-shape segment is easy for diamond opening.
Among the natural stones, there is a kind of stone called
sandstone. It is natural sand and gravel and stone powder that pass
through the water and continuously precipitate to form a stable
structure. Later, through the movement of the earth’s crust, the
river is called a mountain range, which forms the sandstone we see
now Because it has been in water for a long time during the
formation process, the sandstone composition also contains iron
oxide, clay and other ingredients. Of course, most of it is still
gravel. The biggest advantage of this material is that it is not
afraid of water, so it is widely used for exterior walls and
decorations. Walls, outdoor floors, stone carvings, etc.
Diamond segments for 300-800mm saw blade:
| Diameter | Diameter | Core Thickness (mm) | | | | No. of Teeth |
| mm | inch | | Length | Thickness | Height | |
| 300 | 12″ | 2.0/2.2 | 40 | 2.8/3.0 | 8/10/12/15 | 21 |
| 350 | 14″ | 2.2/2.4 | 40 | 3.0/3.2 | 8/10/12/15 | 24 |
| 400 | 16″ | 2.6/2.8 | 40 | 3.4/3.6 | 8/10/12/15 | 28 |
| 450 | 18″ | 2.8/3.0 | 40 | 4.0/4.2 | 8/10/12/15 | 32 |
| 500 | 20″ | 2.8/3.0 | 40 | 4.0/4.2 | 8/10/12/15 | 36 |
| 600 | 24″ | 3.6 | 40 | 4.6 | 8/10/12/15 | 42 |
| 700 | 28″ | 4 | 40 | 5.2 | 8/10/12/15 | 42 |
| 800 | 32″ | 4.5 | 40 | 6 | 8/10/12/15 | 46/57 |
Diamond segments for 900-3500mm single/multi diamond blades:
| Diameter | Diameter | Core Thickness (mm) | | | | No. of Teeth |
| mm | inch | | Length | Thickness | Height | |
| 900 | 36″ | 5 | 22/24 | 6.0/6.6 | 12/13/15 | 64 |
| 1000 | 40″ | 5.5 | 22/24 | 6.4/7.0 | 12/13/15 | 70 |
| 1200 | 48″ | 6 | 22/24 | 7.4/8.0 | 12/13/15 | 80 |
| 1400 | 55″ | 6.5 | 22/24 | 7.8/8.4 | 12/13/15 | 92 |
| 1600 | 64″ | 7.2 | 22/24 | 8.4/9.0 | 12/13/15 | 108 |
| 1800 | 72″ | 8 | 22/24 | 9.2/9.8 | 12/13/15/20 | 120 |
| 2000 | 80″ | 8 | 22/24 | 9.5/10.5 | 12/13/15/20 | 128 |
| 2200 | 88″ | 9 | 22/24 | 10.5/11.5 | 12/13/15/20 | 132 |
| 2500 | 110″ | 9 | 22/24 | 11.5/12.5 | 12/13/15/20 | 140 |
| 3000 | 120″ | 10 | 22/24 | 12.5/13.5 | 12/13/15/20 | 160 |
| 3500 | 140″ | 10 | 22/24 | 13.5/14.5 | 12/13/15/20 | 180 |
