Characteristics:
The original paper holder arm is made of nodular cast iron
QT500-7, which is cast
by a special process, with high strength and never deformed,
ensuring the safety
of the original paper holder arm.
The main machine and the tool holder are made of ductile iron
QT500-7, which is
manufactured by precision machining and has high strength to ensure
that the
tool holder will never be deformed.
The whole machine uses NSK imported original bearings.
The whole machine uses imported electrical components from
Germany Muller
and Japan Omron.
The conveyor belt adopts the Japanese Nita brand.
The slitting accuracy is ±0.5mm, and the maximum speed of the
machine is 350
sheets/min.
The back-cutting knife adopts German nickel-chromium-molybdenum
diamond
material tungsten steel knife, with high precision and never
deformed; the blade is
easy to adjust.
The automatic diagonal system is adopted to realize the rapid
diagonal of the work
order.
Equipped with Dayuan’s first automatic recurve adjustment device
to ensure rapid
leveling when adjusting the recurve.
The paper feeding part adopts a pre-pressing device to realize
the paper without
wrinkle.
Chinese and English touch screen operation interface.
The Japanese SMC automatic tension control system and pneumatic
components
are used to ensure the stable operation of the brake control system
and the
accuracy of every pneumatic action
Specification:
Model CM-1400A
Cutting method
Top blade rotary cutting
Bottom blade fixed
Paper grammage 60-550gsm
Max. unwinding diameter 1800mm
Max. paper reel width 1400mm
Cutting length 450-1600mm
Cutting accuracy ±0.5mm base on cutting length 1000mm
Max. cutting speed 300 m/min
Maximum paper stack height 1500mm
Compressed air pressure 0.8Mpa
Voltage 380V,50Hz / 220V,50Hz
Machine weight 11000kg
Cutting accuracy:
a) Based on the density, number of rolls and material of the roll
paper, ±0.5mm for
less than 1000mm, ±0.1% for more than 1000mm, ±0.1% when
accelerating or
decelerating
b) The above data is based on stable operation and correct
operation procedures
during cutting. (When the number of cut paper rolls is 1 roll, the
cut paper length is
the correct length)
Output:
The actual output depends on the paper material, paper weight, cut
length, number of
rolls, operator skills, operating conditions, etc.
