Full Automatic Double-splicing Box (Case) Gluing Machine
Model: JH-2800F-P
1. Features :
Modular structure design which is easy for adjustment Machine
function upgrade is available based on customer request.
Humanized design of accessories installation, simple and easy to
operate.
Machine drive is controlled by independent motor.
Whole machine can be adjusted by one hexagonal wrench.
Special sheet correction device ensures accuracy sheet feeding.
Trombone(pressing) unit equipped with correction and alignment
device,which improves gluing effect.
Strengthened and widen belts which is suitable for corrugated box.
Collection unit adopts cylinder pressure system, which helps to
adjust pressure and ensures product gluing effect.
Machine guide plate equipped with electric movement system which is
easy for adjustment.
Touch screen control panel.
Upper and lower plate adopts linear guiding system, which ensures
mechanical accuracy of movement.
The remote controller makes machine operation more convenient.
2.SPECIFICATIONS:
| Model | JH-2800F-P |
| MAX. SHEET SIZE | 1400*1400mm |
| MIN. SHEET SIZE | 520*320mm |
| APPLICABLE PAPER | cardboard:300g, corrugated paper F, E, C, B, A, EB ,AB |
| SPEED | 0-120M/min |
| MACHINE DIMENSION | 18600*3650*2000mm |
| TOAI POWER | 45KW |
| MAX.AIR DISPLACEMENT | 1.7m³/min |
| TOTAI WEIGHT | 17500kg |
3. Technical Parameters of Box Making:
Basic type | Model | JH-2800F-P |
| Parameter | Max | Min |
 | A | | 100 |
| B | 1000 | 240 |
| C | 60 | 30 |
| D | 1100 | |
| E | 1000 | 420 |
| F | 2740 | |
| G | | 520 |
| H | | 520 |
4. Details of each section:
(1)FEEDER
·Dual servo synchronous paper feeding system with vacuum suction
tape, ensuring accurate and stable paper feeding.
(2)SPLICING COMPONENT
·Four sets of cylinder paper-stopper positioning system, ensuring
the high bottom line precision of the carton. Two sets of pneumatic
side positioning system at the left and right side, ensuring the
precision at the joint of the carton. Dynamic feeding splicing of
two pieces under the control of PLC and machine interface, ensuring
the precision of splicing.
(3)FOLDING UNIT
·A pair of servo motors at the left and right side simulating the
manual dynamic folding, with push-back servo motor to prevent
high-low lines and scissors crossing in the rebounding process of
paper after the formation, so as to reduce the defective products
to a great extent.
(4)TROMBONE (PRESSING) UNIT
·Adjustable upper and lower belts, works together with correction
device and jamming detecting device.
(5)CONVEYING UNIT
·Correction positioning before conveying unit, helps to avoid from
improper gluing.
