Noise Reduction Vibrating Bowl Feeder Plastic Part Vibratory
Magnetic Feeder
1 . Descriptions:
Electric Vibratory bowl feeders are designed to operate
autonomously for extended periods of time, minimizing the need for
human intervention. However, regular maintenance is essential to
ensure optimal performance and prevent system malfunctions.
Neglecting maintenance can result in various problems. Here are the
four most common issues encountered with Vibratory bowl feeders:
Noise during operation: Improper maintenance can lead to excessive
noise emanating from the feeder while it is in use.
Low amplitude and reduced feed rate: Insufficient attention to
maintenance can cause a decrease in the feeder's amplitude,
resulting in a lower feed rate.
Intermittent operation: In some cases, the feeder may only work at
high or no amplitude intermittently, indicating a
maintenance-related problem.
Dead spot in the feeder bowl: A dead spot refers to an area where
parts feeding and orientation cease to occur beyond a certain
point. Neglecting maintenance can contribute to the development of
dead spots.
Reasons for decreased feed rate often arise after prolonged use of
electric Vibratory bowl feeders. Two primary causes include:
Splintered spring: Over time, the spring may develop cracks or
holes, leading to a decline in the feeder's performance.
Rubber feet degradation: Proper installation of the feeder on a
level surface is crucial, and rubber feet are utilized for this
purpose. Environmental factors such as high temperatures can cause
rubber feet to become soft, swell, or suffer damage, compromising
the system's balance and performance.
Other factors that can contribute to low amplitude or reduced
feeder performance include:
Lack of a feeder cover.
Corrosion of spacers and springs.
A significant gap between the armature and the coil.
Weld seam breakage in the coil assembly.
To maintain optimal performance, it is important to address these
issues through regular maintenance. This may involve replacing
damaged springs, ensuring proper installation on a level surface,
inspecting and replacing worn rubber feet, and addressing any
corrosion or weld seam breakage. By prioritizing maintenance, you
can extend the lifespan of your electric vibratory feeder and
ensure consistent and efficient operation.
2 . Specifications:
| Product name | Vibratory Bowl Feeder |
| Material | Aluminum(AL7075), Stainless Steel(SUS304) or Based on Customers'
Requirements |
| Controller | CUH,Sanki,Sinfonia,REO,Afag |
| Voltage | 220V 50HZ/110V 60Hz or Based on Customers' Requirements |
| Power | 300W/500W/1000W/1500W/2000W |
Material Speciality | Excellent Processing Properties,High Strength, High Hardness |
| Speed | Based on Customers Requirements |
| Warranty | 2 Years |
| Certification | CE, ISO9001, ROHS |
| Lead Time | 3 Working Weeks |
3 . 4 Tips to Reduce Vibratory Feeder Coil Burnout:
To ensure the optimal functioning of Vibratory bowl feeders and
prevent issues that can lead to equipment failure, it is important
to follow these troubleshooting tips:
Check the Spring Pack: The spring pack supports the weight and
functionality of the bowl and track in a vibratory feeder. Ensure
that the load placed on the bowl does not exceed the capacity
specified by the manufacturer to prevent spring breakage and
equipment failure.
Verify the Functioning of the Coil: Inspect the coil in the
vibratory feeder for any gaps or signs of reduced functionality.
Gaps between the turns of the coil can cause problems and excessive
heat. Check the coil's strength and functionality to ensure it is
in proper working condition.
Monitor the Output: Ensure that the voltage and frequency output
from the machine and the controller match the requirements.
Determine if the machine requires an AC or DC output and select the
appropriate controller accordingly.
Choose the Right Input: Select and monitor the input voltage
carefully. If the machine requires a specific voltage input, such
as 240V, using a lower or higher input can lead to erratic
performance, overheating, and system breakdown.
By following these steps, you can help ensure that your vibratory
feeder system operates smoothly. However, if you encounter problems
that you cannot resolve or have concerns about any part or process,
it is recommended to contact your supplier or maintenance service
provider. Seeking assistance from experienced professionals can
help address small issues before they escalate into larger problems
in the future.
4 . More Pictures:
