Description of the Equipment
1.1 Brief introduction The furnace includes loading table, heating
section, quenching and cooling section, unloading table, and
control system. It is used to manufacture flat glass for
window,door furniture, home appliance, architecture glass, etc.
1.2 Loading Table The loading table is composed of rubber-covered
rollers and Kevlar rope. When the glass is put onto the rollers,
the glass will be conveyed automatically to the entrance of the
furnace where it will be in ready-to-enter-furnace position and the
rollers stop moving. It will send the glass into the furnace once
the computer control system gives enter command.
1.3 Heating Section The structure of the heating section is of a
double-layer box type covered with thermos-insulation material.
Inside the section there is a conveyor system with high temperature
resistant ceramic rollers. Heating elements and radiation plates
are installed on the upper layer and lower layer of this section.
The upper layer radiation plate is special heat resistant and
anti-corrosion cast material. The heating element is of an
integrated part with spiral type resistance erected on ceramic
part, it's easy to replace. When the glass is going to enter the
furnace, the front door of the heating section opens the rolls of
the loading table and heating section move at the same time. When
the glass is in the furnace, the front door will close and the
glass on the rollers will be moved back and forth at the distance
calculated by the controlling system automatically, so that the
glass will be heated evenly. The upper section can be lifted up for
maintenance. The heating elements are in matrix layout.
1.4 Flat Quenching/Cooling Section The alloy sections and steel
sheet is cold riveted to avoid deformation of heat welding, ensure
effectively the entire flatness at air face of quench. Rational
nozzle aperture and arrangement of air hole guarantee the glass
even cooling. The upper and lower quenches are combined with
linkage and individual drives, which can actually control the
rational height for air nozzle of quenches. Matched with balance
control of upper and lower air amount, the top and bottom of the
glasses can reach to optimum heat radiation, so as to ensure the
flatness of tempering glass.
1.5 Unloading Table The unloading table is the similar as the
loading table. When the glass is transported to the end of the
conveyor, the rollers will stop, and the glass can be taken away by
hand, or by robot, if there is available at the customer's factory.
1.6 Control System
Productivity:
| Glass thickness(mm) | Glass tempered cycle(load/hour) | note |
| 4 | 18-22 | The size, producing area and color of glass panel will cause the
production difference. The production of glass plate with small
size and deep color will be slightly larger. |
| 5 | 16-18 |
| 6 | 14-16 |
| 8 | 10-12 |
| 10 | 9-10 |
| 12 | 7-8 |
| 15 | 5-6 |
| 19 | 3-4 |
Suitable glass sorts
Tinted glass
Patterned glass
Silk screen printing glass
Clear float glass
Equipment Structure & Manufacturing Standard
Heating system
Heaters in top of furnace,
Heat pipes are arranged in a split way
so that the glass can be heated evenly
Double belts driving system, better synchronism and safer;
In the bottom of the heating section, above the heating elements,
there are radiation plates, which is corrugated shape, no
deformation under high temperature . Broken glass pieces will fall
down on the radiation plates, easily and convenient for cleaning;
Ceramic bricks, customized, precisely diameter, small gap, durable,
better insulation performance, easily replacement.
Glass cooling section
Aluminium alloy material
Uniform punching
The space of top and bottom can be adjust.
Sea worthy packing
Company Profile:
Founded in 2010, Foshan Star Glass Machinery Co., Ltd. is a
high-tech enterprise specializing in the
production, research and development and sales of glass deep
processing machinery. The company is
located in Foshan City, a major glass machinery center.
The company is committed to the production of glass radiant
tempering furnace, convection tempering
furnace, flat bending dual-purpose tempering furnace, automotive
glass bending furnace, nonautoclave
PVB laminating production line.
After years of hard work and exploration, the company has obtained
a number of national patents, and
its technology is ahead of the domestic level. The products sell
well all over China and are exported to
Australia, the United States, the Middle East, India, Vietnam,
South America and other places.
Companies adhering to the principle of quality first,
service-oriented, and constantly improve the
company's level and product quality, and strive to create a
skilled, high-quality team. We will sincerely
cooperate with new and old customers at home and abroad with
sincerity and jointly develop the
bright road of glass machinery manufacturing industry.
cooperation partner
After Sales Service
nExhibition
FAQ
1. who are we?
We are based in Guangdong, China, start from 2011,sell to South
America(30.00%),Southeast Asia(20.00%),Mid East(15.00%),Eastern
Europe(10.00%),Africa(10.00%),North America(10.00%),Western
Europe(3.00%),Eastern Asia(2.00%). There are total about 11-50
people in our office.
2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;
3.what can you buy from us?
Glass Machine,Glass Furnace,Glass Bending Furnace,Glass Bending And
Tempering Furnace,Glass Machines
4. why should you buy from us not from other suppliers?
Our company has a professional R & D team and a strict quality
management system. 10 years of export experience. Mature
after-sales installation team.
5. what services can we provide?
Accepted Delivery Terms: FOB,CIF,EXW,DDP;
Accepted Payment Currency:USD,EUR,JPY,CAD,AUD,HKD,GBP,CNY,CHF;
Accepted Payment Type: T/T,L/C,D/P D/A,MoneyGram,Credit
Card,PayPal,Western Union,Cash,Escrow;
Language
Spoken:English,Chinese,Spanish,Japanese,Arabic,French,Russian
