PHiliphh MX400 Patient Monitor Battery Charge Board 453564271771
PHiliphh MX400 patient monitor battery charge board 453564271771
Brief Introduction
The PHiliphh MX400 patient monitor battery charge board part number
is 453564271771. This board is responsible for charging the battery
in the patient monitor, ensuring that it stays operational for
extended periods of time. If you are experiencing issues with the
battery charging on your PHiliphh MX400 patient monitor, it is
recommended to replace the battery charge board to restore proper
functionality. Please consult with a medical equipment technician
for assistance with replacing the board.
Specification of PHiliphh MX400 patient monitor battery charge board 453564271771
| Product Name | PHiliphh MX400 patient monitor battery charge board 453564271771
|
| Brand | PHiliphh |
| Part No | 453564271771 |
| Application | PHiliphh MX400 patient monitor |
| MOQ | One piece |
| Warranty | 90 days |
| Use for | Hospital ,Clinic |
Battery storage
When storing batteries, make sure their terminals do not come into
contact with metal objects or other conductive materials. If
batteries are stored for an extended period of time, they should be
stored in a cool place, ideally at 15°C (60°F), with a state of
charge between 20% and 40%. Storing batteries in a cool place slows
down the aging process.
Batteries should not be stored at temperatures outside the range of
-20°C (-4°F) to 60°C (140°F). Do not store batteries in direct
sunlight. Stored batteries should be partially charged to between
20% and 40% of their capacity every 6 months. They must be fully
charged before use.
NOTE
Storing batteries above 38°C (100°F) for extended periods can
significantly reduce their lifespan.
Battery life management
The lifespan of a lithium-ion battery depends on the frequency and
duration of use. With proper maintenance, the lifespan is
approximately 3 years or 500 charge-discharge cycles, whichever
comes first. Additionally, experience indicates that the incidence
of failures may increase with battery life due to the stress
accumulated during daily use. Therefore, we strongly recommend
replacing lithium-ion batteries after 3 years or 500 charge and
discharge cycles. The age of a lithium-ion battery starts from the
date of manufacture. To view the manufacturing date and number of
charge and discharge cycles, select the battery symbol on the
patient monitor screen. The date of manufacture and the number of
charge and discharge cycles are displayed on the screen along with
other battery data.
Thank you so much for your attention .If you're interested in PHiliphh MX400 Patient Monitor Battery Charge Board 453564271771 ,feel free to contact us .Thank you .
