ANCEL BST100 Function
1.Identify battery status Good or Replace
2.Check Battery Capacity - Cold Cranking Amps (CCA), DIN, EN and
IEC information relative to battery rating.
3.Check Internal resistance value (Ohm)
4.Display battery life in percentage (%)
5.Battery Cranking Test, load test
6.Battery Charging Test, Ripple Test
7.Support battery ripple test and review test data
12V Battery Tester Features
1.Fast and smooth running speed with STM-32 chip set hardware
2.Accurate test results, using high precision amplifier and
calibrated by professional battery testing tool, BST100 reading
accuracy up to 99%.
3.Wide testing range cover from CCA 100- 2000 , 3- 220 AH, best in
the market.
4.Industry initiative graphical battery voltage real time
monitoring, can be analysis battery data more accurate.
5.Unique battery results display in percentage and meter mode.
6.Test all automotive cranking lead acid battery, including
ordinary lead acid battery, AGM flat plate battery, AGM spiral
battery, and Gel battery, etc.
7.Polarity reverse connection protection, reverse connection will
not damage the tester or affect the vehicle and battery.
8.Directly test the battery with loss of electricity, no need to
full charge before testing.
9.Testing standards include currently the world's majority of
battery standards, CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE, GB.
10.BST100 is used to test a wide range of 12V batteries (Starting
[SLI], Deep Cycled and Marine) of Wet (Flooded), VRLA or
Maintenance Free (MF), Sealed Maintenance Free (SMF), Absorption
Glass Mat (AGM) and GEL EPB cell
Disadvantages of the load test method:
(1) Only available for large capacitance battery or storage
battery. The small capacitance battery can not load 40-80A large
current in 2-3 seconds.
(2) When the large current going through the battery, there comes
out a polarization phenomenon from the internal electrode, which
can cause polarization internal resistance. As a result, it has to
be tested in a short time. Otherwise, there will be a large error
in the internal resistance value.
(3) The internal electrode will be damage generally when the large
current goes through the battery.
BST100 Support Languages:
English, French, German, Russian, Spanish, Italian
Advantages of this method:
(1) It can be used for checking almost all the batteries including
low capacity battery and internal resistance of the notebook
battery exclusively.
(2) It will not harm the battery by using this method.
