Anti Corrosion Isolation PTFE Solenoid Valve Group For Chemical
Acid Alkali
Product Features:
1. Working Medium: Chemical, Acid, Alkali, Corrosive Liquids, etc
2. Working Pressure: 0 to 3 bar
3. Working Temperature: FFKM (-40 to +180ºC), FKM (-30 to +150ºC)
4. Port Size: M6
5. Orifice Size: 1mm, 1.5mm
6. Body Material: PTFE
7. Seal Material: FFKM, FKM
8. Function: 2 Way Normally Closed
9. Operation: Direct Acting
10. Voltage: 12VDC, 24VDC
11. Application Examples: Analytical Instruments, Clinical
Diagnostic Analyzers, Bio-Instrumentation, etc
Technical Data:
Main Dimension:
Our Production:
FAQ:
Question 1: What is a solenoid valve used for?
Answer 1: A solenoid valve is used to open, close, mix, or divert
media in an application. They are used in a wide variety of applications.
Question 2: How can you tell if your solenoid valve is bad?
Answer 2: If the solenoid valve fails to open or close, is
partially open, makes a humming noise or has a burned-out solenoid
coil, you need to troubleshoot the valve solenoids.
Question 3: How do I choose a solenoid valve?
Answer 3: When choosing a solenoid valve, it is important to know
your media. Depending upon the media and flow requirement, choose
the material, port size, orifice size, temperature, pressure,
voltage, response time and certification required for your
application.
Similar Products:
Focus on your demands, Offer you best solution:
√ Contact us if some points you have doubt
√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for
√ Contact us if you are doing designing
Welcome to your any question and inquiry!
