Effective Separation Density Teeter Bed Separator / Fluidized Bed Separator for Global Market

1.Product name: GSF hydraulic classifier,Hydrosizers (aka hydraulic classifier,Teeter Water Classifiers, Density Separators)
2.The grain—size: < 5 mm
3.Production capacity: 3—40 t/h
4.Material: Quartz , feldspar ,Solid particle materials
5.Application field: Mainly used in various industries with strict classification and selection of quartz silica sand /glass sand

6.Equipment introduction:
Mainly used for fine mineral particle degree of classification
When extremely sharp classification is needed to separate <4 mesh (<5mm) granular material by size or specific gravity, Hydrosizers have efficiencies of separation comparable to Sizing Screens but at a fraction of the footprint and cost. A producer who needs tight control over classification or who wishes to separate minerals of two different specific gravities or remove lightweight contaminants would be an ideal candidate for a Hydrosizer.
Hydrosizers with other in-house equipment, such as Hydrocyclones, Separators, Pumps, Attrition Cells, Dewatering Screens, Thickeners and Filter Presses, to offer complete wet processing plants.

7.Working principle:
To make its extremely sharp classification, Hydrosizers use the hindered settling principle.
Feed material (typically Hydrocyclone underflow) enters the top of the unit via a central feed-well. Simultaneously, process water is injected through an array of pipes located near the bottom of the separation chamber. This water injection causes an upward rising current of water that flows over the peripheral weir and is collected in the overflow launder. As particles in the feed meet this rising current of water, finer and less dense fractions are lifted out and swept over the overflow weir. Coarser and denser particles pass downward through this current and are collected in the underflow cone to await discharge.
Particles that are near the size of separation, being neither massive enough to migrate to the underflow cone nor small enough to be lifted out, begin to accumulate in the separation chamber. This accumulation is described as a teetered or fluidized bed, similar in many ways to quick sand. Within this teetered bed, solids settle through the tank in an environment known as hindered settling. This phenomenon slows down the settling rates of particles and allows them to be more critically reviewed as either a member of the coarse or fine fraction.

8.Advantages:
1) the material in the cylinder body by the rising water effect, achieve the purpose of sizing, the proportion of separation,
high efficiency, low energy consumption.
2) equipped with automatic control system, the operation parameter adjustment is simple and convenient, easy to control.
3) a water tank at the bottom of the barrel is equipped with special devices and to rise above the water hole automatically
shut down, the cylinder body of the material will not block the hole and into the tank.

Contact Information-

Annie Chang

Mob: +86 18678029069

(WhatsApp/wechat)

Skype:anna1983cyj ,QQ:896247401
Email:annieflower.chang at sdguote.com
website: https://sdguote.cnen.alibaba.com/
If you have any questions, pls don't hesitated to contacting me anytime.

OEM Service

We could make whole production line or single equipment following different clients requirements.

For whole process as below:

• Firstly Please offer detailed technical drawing in CAD including whole detailed requirements.
• Secondly we will offer different technical proposals follwing offered drawings with requirements for clients.
• Thridly make decision for which proposal and confirm it.
• At last manufacture whole equipments following techncial proposal and holding test in warehouse.
• Finally finished equipment/prodcution line and offered service as turn-key-project.

For details, please contact me:

Annie Chang

Mob:0086-18678029069(whatsapp)

E-mail: Annieflower.chang dot sdguote.com

Weifang GUOTE Mine Equipment co.ltd. is professional and modern enterprise including research and development, engineering design, production and installation, debugging services , automatic control equipment, non-metallic mineral production line test, design, consultation and the complete line of delivery.The scope of services related to mining, metallurgy, electric power, coal, glass, paper, chemical building materials, refractory materials, tiles,food, cement ,etc.Our product sell well in more than thirty provinces, autonomous region.(For details, please contact me:Annie Chang,Mob:0086-18678029069(wechat/whatsapp),E-mail: Annieflower.chang dot sdguote.com)

Our product have electromagnetic, permanent magnetic separator, dry wet magnetic separator,electromagnetic vibration feeder, quartz sand making machine, air classifier, dust collector, water separator, washing machine, flotation machine,metal detector, screw conveyor, timing quantitative feeding,weigher and centralized control system, etc.
Facing the new opportunities and challenges, the company in line with the spirit of "honesty-oriented, mutual benefit, cooperation and innovation" , dedicated to providing “dependable,simple and efficient” products and services to customers, make enterprises become domestic advanced mining equipment manufacturer.
Our company is willing to work together with people from all walks of life for a better future.