Electric Loader
Recycling, loading and transportation
The mucking loader can only be loaded into the recycling and
transportation vehicle by using equipment with a sufficient
traction capacity.
• The lifting point specified by the manufacturer shall be used.
• During loading and transporting, the mucking loader and the
required auxiliary devices shall be fixed to prevent unnecessary
movement.
• The slurry, snow cover and ice cube on the running mechanism and
the chassis of the mucking loader shall be cleaned so as to avoid
the risk of slipping on the loading ramp.
• If a truck, light loader or train is used for transport, then a
check block shall be used to fix the mucking loader and fasten it
at the binding point.
• Before departure, first check the transport route and confirm
whether the road is wide enough, and whether the passage and
entrance below the bridge are large enough, and whether roads and
bridges have adequate carrying capacity.
Electrical system drawing
