Underground Wheel Loader
The methods to prevent the swing of work equipment include lowering
to the ground; or taking other equivalent measures, such as
hydraulic cylinder support, trestle, etc.
.As long as the machine is working, it is prohibited to enter the
work area without any protective measures.
.Lift up the mucking loader with the lifting gear to prevent
slipping. Check and ensure that all the jacks are in the vertical
position.
.The mucking loader lifted up must be supported by an appropriate
structure, i.e., crossed stacking batten, square timber or steel
truss, etc.
.After being lifted up by the work accessories, the mucking loader
shall be stabilized immediately after the support structure is used
for lifting. If the equipment is only supported by a built-in
hydraulic device, it is strictly prohibited to carry out any work
under the mucking loader lifted up.
.Turn off the motor & Power supply before performing any
maintenance and repair operations. Of course, if the maintenance or
repair work must be done in the case of motor running, this
requirement can be ignored in this case.
electrical motor & oil pump assembly
