Underground Rock Mining Drilling Machine
Product Function and Application:
Mucking loader with breaking hammer is one type of high efficiency
,multifunctional,environment protection machine integrating
moving,breaking,digging,collecting,loading,conveying and dumping.
Mucking loader with breaking hammer is used widely in the narrow
and restricted tunnel of coal mine,metal mine,non-metal mine,
hydropower project,subway and railway station project,national
defence construction project etc.?
Mucking loader with breaking hammer is widely used for coal driving
and cutting in the narrow and restricted tunnel of coal mine,no
blasting is required.
It is also used for driving and tunneling in the tunnel of metal
mine,non-metal mine, hydropower project,subway and railway station
project,national defence construction project etc.,no blasting is
required.
Mucking loader with breaking hammer also can be used for loading
bulk material in the open-air operation.
Mucking loader also can be used for danger removal with its working
boom.
Mucking loader with breaking hammer can repair bottom and side of
tunnel,and break bigger rock into smaller after undertaking
blasting .
The products adopt electric power full-hydraulic drive system,and
adopt hydraulic pilot operation,no tail gas,environment
protection.?
Pushing force is large, digging range is wide,full face mucking,no
manual work is needed to clean the working site.
Machine hydraulic system adopt air cooling,and come with seat and
cab.
The products are safety and reliable and efficient and environment
protection,labour-saving.
Selection and qualification of operator
Only qualified, experienced and reliable personnel are allowed to
use the equipment, and the personnel are well versed in the
relevant terms and work procedures. Meanwhile, the minimum age
limit permitted by law shall be observed.
The operator must determine the responsibilities of relevant
personnel during the transportation, installation, disassembly,
use, maintenance and scrapping. The designated personnel must
receive corresponding operation training. The trainees can only use
the equipment under close supervision of the experienced operator.
The operation company must confirm that the relevant work can only
be carried out by trained qualified personnel.
The maintenance work of the equipment can only be carried by
trained professionals.
Spare parts photos:
