Continuous Mining Machine
Starting
Before the mucking loader is started, ensure that the driver is
familiar with the operation manual, especially the chapter "general
safety rules". Before starting, check whether all the levers are in
the neutral position (stationary position), so that there are no
unexpected action when the equipment is started. During the
function test, the irrelevant personnel (except the operator) are
not allowed to enter the working area of the mucking loader,
otherwise they may be easily injuried!
Turn on the power master switch and then press the motor start
button.
The loader is equipped with phase sequence protector which can
avoid machine damages caused by motor reversal due to wrong phase
sequence. If the loader cannot be started, please first change any
two-phase wire connections of power supply and then restart it.
The hydraulic pump shall be exhausting again.
When the hydraulic system is exhausting, no one is allowed to be
located within the scope of movement work of the working mechanism
and the transport mechanism. Because the working mechanism and the
transport mechanism may have unexpected movements, it may lead to
serious injuries.
The exhausting of hydraulic system is achieved through several
movements of hydraulic actuator.
Check the leakage of hydraulic system.
After 10-second startup is completed, the machine can be used with
pressure. When the machine is shut down for more than 4 hours, the
pump shall be idling for 5 ~ 10 minutes before the machine is
working with pressure.
General drawing:
Continuous Mining Machine
