AXK Series Thrust Needle Roller Bearing
METRIC SERIES
• Combine low friction and thin cross section with the convenience
of complete packaged assembly.
• Integral washer allows use where one thrust backup surface is not
suitably hardened or ground.
• Backup surface should meet limits of permissible
out-ofsquareness, dishing or coning.
• Backup surface fi nish of 0.2 μm Ra min. (8 μin. Ra min.)
required.
• Assembly can be either shaft- or housing-piloted, but not both.
| Shaft Diameter (mm) | Thrust Needle Roller and Cage Assemblies | Thrust bearing washer |
| Code | Mass g | Bearing Washer | Mass g | Shaft Ring | Seat Ring | Axial Bearing Washer | Mass g |
|
|
| 4 | AXK 0414TN | 0.7 | AS 0414 | 1 | 一 | - | - | - |
| 5 | AXK 0515TN | 0.8 | AS 0515 | 1 | - | - | - | - |
| 6 | AXK 0619TN | 1 | AS 0619 | 2 | LS 0619 | - | - | 4 |
| 8 | AXK 0821TN | 2 | AS 0821 | 2 | LS 0821 | - | - | 4 |
| 10 | AXK 1024 | 3 | AS 1024 | 3 | LS 1024 | - | - | 7 |
| 12 | AXK 1226 | 3 | AS 1226 | 3 | LS 1226 | - | - | 8 |
| 15 | AXK 1528 | 4 | AS 1528 | 3 | LS 1528 | GS 81102 | WS 81102 | 9 |
| 17 | AXK 1730 | 4 | AS 1730 | 4 | LS 1730 | GS 81103 | WS 81103 | 9 |
| 20 | AXK 2035 | 5 | AS 2035 | 5 | LS 2035 | GS 81104 | WS 81104 | 13 |
| 25 | AXK 2542 | 7 | AS 2542 | 7 | LS 2542 | GS 81105 | WS 81105 | 19 |
| 30 | AXK 3047 | 8 | AS 3047 | 8 | LS 3047 | GS 81106 | WS 81106 | 22 |
| 35 | AXK 3552 | 10 | AS 3552 | 9 | LS 3552 | GS 81107 | WS 81107 | 29 |
| 40 | AXK 4060 | 16 | AS 4060 | 12 | LS 4060 | GS 81108 | WS 81108 | 40 |
| 45 | AXK 4565 | 18 | AS 4565 | 13 | LS 4565 | GS 81109 | WS 81109 | 50 |
| 50 | AXK 5070 | 20 | AS 5070 | 14 | LS 5070 | GS 81110 | WS 81110 | 55 |
| 55 | AXK 5578 | 28 | AS 5578 | 18 | LS 5578 | GS 81111 | WS 81111 | 88 |
| 60 | AXK 6085 | 33 | AS 6085 | 22 | LS 6085 | GS 81112 | WS 81112 | 97 |
| 65 | AXK 6590 | 35 | AS 6590 | 24 | LS 6590 | GS 81113 | WS 81113 | 115 |
| 70 | AXK 7095 | 60 | AS 7095 | 25 | LS 7095 | GS 81114 | WS 81114 | 123 |
| 75 | AXK 75100 | 61 | AS 75100 | 27 | LS 75100 | GS 81115 | WS 81115 | 142 |
| 80 | AXK 80105 | 63 | AS 80105 | 28 | LS 80105 | GS 81116 | WS 81116 | 151 |
| 85 | AXK 85110 | 67 | AS 85100 | 29 | LS 85110 | GS 81117 | WS 81117 | 159 |
| 90 | AXK 90120 | 86 | AS 90120 | 39 | LS 90120 | GS 81118 | WS 81118 | 234 |
| 100 | AXK 100135 | 104 | AS 100135 | 50 | LS 100135 | GS 81120 | WS 81120 | 350 |
| 110 | AXK 110145 | 122 | AS 110145 | 55 | LS 110145 | GS 81122 | WS 81122 | 385 |
| 120 | AXK 120155 | 131 | AS 120155 | 59 | LS 120155 | GS 81124 | WS 81124 | 415 |
| 130 | AXK 130170 | 205 | AS 130170 | 65 | LS 130170 | GS 81126 | WS 81126 | 663 |
| 140 | AXK 140180 | 219 | AS 140180 | 79 | LS 140180 | GS 81128 | WS 81128 | 749 |
| 150 | AXK 150190 | 232 | AS 150190 | 84 | LS 150190 | GS 81130 | WS 81130 | 796 |
| 160 | AXK 160200 | 246 | AS 160200 | 89 | LS 160200 | GS 81132 | WS 81132 | 842 |
FAQ:
1. What is your the payment condition?
For regular products,No advance payment is needed, you can make
100% payment before shipment accordingly.
For customized products,our payment term normally is 30% of
advance, the balance 70% against copy of BOL.
For our long term customers,you can pay 1 month after receiving the
good.
2. What is your sales turnover?
Our whole year sales turnover in 2023 to 2024 is 11 million dollars
3. Do you have any certifications?
Yes, We are an IATF16949 certified needle bearings manufacturer
since 2011.
4.What about the lead time?
Our production period is 30-45 days
5.What is your production capacity?
We are able to produce over 100 million pieces of bearings per year
with different sizes and types
