| Product Name | Condenser Fan Motor | Voltage | 208V-230V |
|---|
| Frequency | 60Hz | Output Power | 1/3-1/5HP |
|---|
| Pole | 8P | AMPS | 2.4-1.4A |
|---|
| Speed | 825RPM | Capacitor | 10μF/370V |
|---|
| Insulation Class | Class F | Power Factor | 0.9 |
|---|
| Other protection | THERMALLY PROTECTED |
|---|
Key Parameters
| Model | Power /HP | Frequency /Hz | Speed /RPM | Rated Current /A | Voltage /V |
| YDK-250-8A2 | 1/3-1/5 | 60 | 825 | 2.4-1.4 | 208-230 |
Ps:all dimension can be customized according to customer
requirement.
Product Features
1. Totally Enclosed Air Over TEAO
2. 70°C Ambient
3. Extended Studs, Drain Holes Both Ends
4. 48” Leads
5.Hubless Lead End
6.Reversible Rotation
7.Automatic Reset Thermal Overload Protector
8.Continuous Duty
9.Single Phase, 60 HZ
10.Class F Insulation
11.BALL Bearings
12.48 NEMA Frame
All trusTec Condenser Fan Motors feature reversible rotation and
thru bolt or band mounting for air conditioning or heat pump
applications.
All trusTec Condenser Fan Motors are designed as a universal PSC replacement
for vertical shaft- up or shaft-down applications. Shell and end
shields are closed for protection against weather.
Product Applications
1. Air conditioner indoor / outdoor unit.
2. Air Purifiers, Air refresher.
3. Range hood, sewer grinder, dehumidifier, medical equipment,
special blender etc.
FAQ
1.Where is your factory?
We are located at Changzhou city of China Jiangsu province, which
is also called as motor producing base, the world's outstanding
motor manufacturers sets factories here.
2. Can you provide the samples for evaluations before oders?
Nomally we provide each model 1 piece sample for free.
3. Are you a manufacturer or trading company?
We are a motor factory and in the industry for more than 10 years,
you are welcomed to visit our factory anytime.
Our company
1. As a professional motor manufacturer, we are specialized in
designing and producing all kinds of motors for room, commercial
and central air conditioners.
2. Our main products are fan coil unit motors, motors for split,
cabinet, window air-conditioner, high static pressure motors,
ceiling air-conditioner motors, air cooling motors, single and
three phase motors, kinds of pump motors, PG motor and DC brushless
motors.
3. Our products have been approved by RoHS, CCC, CE and UL
certificates, and the products have been being exported to the main
market such as North America, Europe and Mid-east.
Learn More
What Are The Differences Between PSC Motors (Permanent Split
Capacitor) And CSCR Motors (Capacitor Start-Capacitor Run)?
PSC motors have a permanently connected run capacitor, which
provides the motor with a constant phase shift. These motors are
known for their simplicity and reliability, and they are often used in applications
where constant speed is required.
PSC motor uses a capacitor in series with its auxiliary winding to
create and maintain a phase difference between its two windings.
This creates two magnetic field with their respective peaks and
valleys differing in a way as to create a resultant rotating
magnetic field. This field makes the rotor to spin.
In CSCR motor, two capacitors (one large value, usually
electrolytic, and other a smaller value capacitor, in parallel to
each other) are connected in series with auxiliary winding, both of
which are in circuit when the motor starts. Phase difference
between windings in therefore much larger and gives a very high
starting torque.
Once the motor gets to near full speed, or over 70% of rated speed,
the larger capacitor is switched off through the action of a
centrifugal switch. Second capacitor remains in circuit to give a
phase difference during running, similar to PSC motor. This design
is the most efficient, and is used to get maximum and optimum
performance from the motor. This is also the costliest design, due
to 2 capacitors and centrifugal switch.
In between we have Capacitor Start motor, which uses an
electrolytic capacitor for starting with a large torque, and the
motor runs on one winding once this capacitor is switched off as
above.
All three design of motor are in use depending on requirements and
economy. CS and CSCR designs are used for large power motors.
