55kw Versatile Biomass Pellet Production Line - Perfect for Various
Biomass Materials and Applications
Product Description:
Sawdust Ring Die Pellet Machine uses rice husks, peanut shells,
melon seed shells, bamboo chips, bagasse, palm shells, branches,
branches, bark, leaves, wood waste; large furniture factories, wood
factories, wood chips produced by various woods in the production
process, etc., and process them as raw materials into renewable
fuel pellets that will replace coal in the future.
Biomass pellet production line equipment mainly includes the
following types:
1. Wood slicer: Cut biomass raw materials such as branches, wood,
production or construction scraps into suitable sizes for crushing.
2. Grinder: Grind biomass raw materials such as wood chips, straw,
etc. into suitable sizes.
3. Dryer: Dry the pulverized biomass raw material to a suitable
moisture content, so as to facilitate better particle formation.
4. Biomass pellet machine: The dried biomass raw material is
compressed through the rotation of the ring die to make pellets
with a certain density for burning instead of coal and other fuels.
5. Cooling equipment.: Cool the pellets to a suitable temperature
for packaging of finished products.
6. Dust removal equipment: In order to avoid dust pollution
generated during the production of biomass pellets, dust removal
equipment, such as cyclone dust collectors, etc. need to be
installed.
7. Packing machine: Automatically weigh and pack the finished
particles.
In addition, according to different application fields, you can
also choose different types of biomass pellet production line
equipment, such as wood pellet machine for wood pellets, straw
pellet machine for straw pellets, etc.
In general, the selection of biomass pellet production line
equipment needs to be considered comprehensively based on factors
such as raw material type, product requirements, and process flow.
Features:
① The sawdust pellet machine can produce biomass pellets based on
various raw materials such as wood chips, straw, and chaff.
②. Various molding technologies such as cold pressing molding and
extrusion molding are adopted, and the oil polishing and shaping
process makes the appearance of biomass particles beautiful and the
structure relatively compact.
③. The wood pellet machine has high output, low energy consumption,
low noise, low failure, strong fatigue resistance, continuous
production, economical and durable.
④. The whole machine adopts special high-quality materials and
advanced coupling transmission device, and the key components are
made of high-quality alloy steel and wear-resistant materials.
⑤. The wood pellet machine mold is placed flat, with the mouth
upward, and directly enters the pelletizing mold from top to
bottom.
⑥. The specific gravity of wood chips is very light, straight up
and down. After the sawdust enters, it is rotated and thrown around
by the pressure wheel, and the particles are evenly pressed.
⑦. The sawdust pellet machine is open upward, which is easy to
dissipate heat. In addition, it also has a set of air-cooled cloth
bag for dust removal and automatic refueling.
⑧. The sawdust pellet machine has a strong enlarged shaft and a
large cast steel bearing seat. Its large bearing does not bear any
pressure, is not easy to break, and has a long service life.
Technical Parameters:
| Model | LGX700A | lgx600A | LGX600 | LGX560 | LGX450 |
| Power(kw) | 160 | 132 | 110 | 90 | 55 |
| Machine Weight (t) | 8 | 7 | 6.5 | 5.6 | 2.9 |
| inner diameter((MM))) | 700 | 600 | 600 | 560 | 450 |
| Capacity (t/h) | 2.5-3 | 2-2.5 | 1.8-2 | 1.2-1.5 | 0.8-1 |
| package size | 2460*1400*2000 | 2200*1200*1750 | 3100*1300*2100 | 2300*1250*2000 | 2160*1000*1850 |
Applications:
