Manufacture Ceramic Alumina Wear Resistant Alumina Tiles / Liners
Production introduction
Manufacture Ceramic Alumina Wear Resistant Alumina Tiles / Liners
According to different customers' needs, raw materials of the
products are strictly controlled in order to ensure that the
product not only takes on good wear-resistant,,
corrosion-resistant, but also rich size. the service life can be
extended at least five years,which is 15% more efficient than a
rubber liner.Also, it prevents pollution to the grinded materia and
increase the capacity of mill ball, resulting in cost cut.
Application
Manufacture Ceramic Alumina Wear Resistant Alumina Tiles / Liners
is mainly used in a variety of equipment for conveying various high
hardness and high abrasive granular materials, including
electricity, heat, steel, coal, cement, mining, smelting,
petroleum, building materials, chemicals, fans, paper, machinery,
powder Coal conveying, material conveying system, pulverizing
system, ash discharge, dust removal system and other mechanical
equipment in industries such as body engineering, grain machinery,
and tobacco. Depending on the combination with the metal substrate,
it can be used on the inner surface of stationary parts, such as
pipes, elbows, separators, chutes, valves, various shells, etc.,
and can also be used on high-speed rotating equipment, such as
various fans. Rotors, impellers, rollers, etc.
Product Size
| Size | Length(mm) | Width(mm) | Thickness(mm) | Shape |
| 10x10 | 10 | 10 | 1.5-10 | Mosaic/hexagonal |
| 11.55x11.55 | 11.55 | 11.55 | 3-12 | Mosaic/hexagonal |
| 12x12 | 12 | 12 | 3-12.7 | Mosaic/hexagonal |
| 17.5x17.5 | 17.5 | 17.5 | 4-10 | Mosaic/hexagonal |
| 20x20 | 20 | 20 | 5-15 | Mosaic/hexagonal |
| 25x25 | 25 | 25 | 5-15 | Mosaic/hexagonal |
| 50x25 | 50 | 25 | 5-10 | Plain Tile without hole |
| 50x50 | 50 | 50 | 5-15 | Plain Tile without hole |
| 100x100 | 100 | 100 | 6-15 | Plain Tile with or without hole |
| 150x100 | 150 | 100 | 6-100 | Plain Tile with or without hole |
| Remark: More than 2000 sizes and shapes are available up to
customer requests |
Technical Data
| Item/Product | HA 92 | HA 95 | ZTA | ZR |
| AL2O3(%) | 92±0.5 | 95±0.5 | 76±0.5 | / |
| ZrO2(%) | / | / | 20 | 94.8±0.5 |
| Bending Strength(Mpa) | ＞220 | ＞280 | ＞400 | ＞1000 |
| Fracture Toughness(MPam 1/2) | ＞3.60 | ＞3.90 | ＞4.50 | ＞7 |
| Rockwell Hardness(HPV) | ＞82 | ＞88 | ＞90 | ＞88 |
| Wear Volume(cm³) | ＜0.50 | ＜0.30 | ＜0.15 | ＜0.10 |
| Density(g/cm³) | ＞3.60 | ＞3.70 | ＞4.10 | ＞5.90 |
Photos
FAQ
1 What is the payment method
30% paid for deposit by T/T after palcing order,the balance to be
paid before shipment.
2 Where you export to?
Australia, Europe, India, South Africa, etc
3 The MoQ is?
MOQ is usually 1 ton, special products can be coordinated with each
other.
