Wind Forming Station Particle Board Forming Machine Full automatic particle board production line

Wind Forming Station for Particle Board Production Line

Description

The PB mechanical forming station is used for form a uniform “mat” of wood particles impregnated with resin at a prior stage in the work process, which is then conveyed to a press suitable for the application.

The material, which is loaded into the forming bin through the load chute, falls by gravity into a wind chamber and passes through a set of air nozzles whose task is to carry out a gravimetric and granulometric screening of the wood particles, which are not carried quite so far, settle in the core of the formed mat.

Main characteristics of wind forming station

• Higher strength for inner bond.
• Uniform structure of mat
• Fine on the surface layer particles
• Lower energy cost
• Easily to adjust the density

Structure of wind forming station

Disc separator

Metering bin

Forming head

Performance

Suzhou Forestry Technologies Co., Ltd. specializes in plywood, MDF/HDF, particle board, OSB production lines, key machines, spare parts and chemical.